Manual V1.
Thank You for Choosing Orange Ever since the founding of the company in 1968, Orange has been a pioneering force in the guitar amplification industry. Today, with a team of the world’s finest amplifier engineers, Orange continues to push back the boundaries of conventional amplifier design. Our commitment to craftsmanship and quality control has allowed our amplifiers to stand the test of time, giving their owners as much pleasure now, as the day they were bought.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. NO USER SERVICEABLE PARTS INSIDE. DO NOT ATTEMPT TO GAIN ACCESS TO THE INTERIOR OF THE PRODUCT.
domestic household waste. Please contact your local authority for details of your nearest approved recycling facility. This device complies with the Canadian Interference Regulations CAN ICES-3(B)/NMB-3(B). This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, that may cause undesired operation.
Volume Controls the output volume level.
Treble Adjusts the upper frequencies with up to 20dB of boost (max. setting) or cut (min. setting). Middle Controls the effect of the FREQ dial with up to 15dB of boost (max. setting) or cut (min. setting).
Bass Adjusts the low-end frequencies with up to 15dB of boost (max. setting) or cut (min. setting). Gain Controls the level of gain applied to the upper frequencies. Increasing the GAIN adds extra harmonics and, at higher settings, heavy distortion. The GAIN control works together with the BLEND control.
Power Switches the mains power supply to the amplifier ON/OFF. Phones For use with most stereo headphones with a 6.35mm connection. The PHONES output also features Cabsim for a more authentic sound, and can be used to send a signal to a recording console/mixer. The internal speaker is disconnected when the PHONES output is in use. Note: To avoid possible hearing damage, do no use headphones at high volume levels for extended periods.
Aux In For use with MP3 players, laptops etc. via a 3.5mm audio cable. The audio signal is internally summed to mono. FX Loop Use the FX LOOP to connect external effects processors/pedals inbetween the amp’s preamp and output stages. Connect the SEND to the input of external effects. Connect the output of the external effects to the RETURN socket.
Blend Controls the amount of gain/upper harmonics blended with the clean signal. The character of the BLEND control is defined by where the GAIN control is set. Higher BLEND settings will also add extra volume. With the GAIN set to minimum, the BLEND control will have the least effect on the overall sound. The BLEND control is located before the EQ controls in the signal path.
Freq Selects the centre frequency of the MIDDLE control, sweeping from 300Hz (min.) to 2.7kHz (max.). Note: When the MIDDLE control is in the centre (12 o’clock position), moving the FREQ control will have no audible effect.
Input Use a quality shielded instrument cable to connect your instrument to the INPUT jack socket. The PAD switch selects the correct input level for basses with active or passive pickups. PAD engaged = -6dB. Tuner Depress the ON/OFF button to engage the integrated chromatic Tuner. Set the Volume to zero for silent tuning if required. The appropriate red LED will illuminate on the display to indicate the note being played. If the green # LED also illuminates, this indicates a chromatic note, e.g.
FX Loop Use the FX LOOP to connect external effects processors/pedals inbetween the amp’s preamp and output stages. Connect the SEND to the input of external effects. Connect the output of the external effects to the RETURN socket.
Footswitch Connect a latching footswitch (e.g. Orange FS-1) to remotely engage/defeat the BLEND/GAIN controls. 1. AC Mains Inlet Refer to ‘Before Using Your Amplifier‘. Connect the supplied IEC cable to the AC Mains Inlet. Ensure the Power switch is set to OFF before connecting the IEC cable. 2 Mains Fuse The mains fuse is located in the pull-out tray underneath the AC Mains Input. If the mains fuse blows, replace only with the exact rating for your region .
