User Manual

Input
Use a quality shielded instrument cable to connect your instrument to the INPUT jack socket.
The PAD switch selects the correct input level for basses with active or passive pickups. PAD
engaged = -6dB.
Tuner
Depress the ON/OFF button to engage the integrated chromatic Tuner.
Set the Volume to zero for silent tuning if required.
The appropriate red LED will illuminate on the display to indicate the note being played. If the
green # LED also illuminates, this indicates a chromatic note, e.g. F Sharp (F#).
The > arrow LED indicates the note is tuned too low in pitch.
The < arrow LED indicates the note is tuned too high in pitch.
Adjust the string’s pitch in the direction shown by the arrows until the green OK LED lit.