User Manual

Footswitch
Connect a latching footswitch (e.g. Orange FS-1) to remotely engage/defeat the BLEND/GAIN
controls.
1. AC Mains Inlet
Refer to ‘Before Using Your Amplifier‘. Connect the supplied IEC cable to the AC Mains Inlet.
Ensure the Power switch is set to OFF before connecting the IEC cable.
2 Mains Fuse
The mains fuse is located in the pull-out tray underneath the AC Mains Input. If the mains fuse
blows, replace only with the exact rating for your region . If the mains fuse continues to blow
contact your Orange dealer.
100V/120V: T2A
230V: T1A
3. Voltage Selector Switch
IMPORTANT!
Refer to ‘Before Using Your Amplifier‘.
Factory set to the region in which the amplifier is intended to be sold.
4. Power Switch
Ensure the amp’s volume controls are set to zero before switching on power to the amplifier.
Switch off when not in use.