User's Manual
Manual for Tire Pressure Monitoring Systems, TPMS
13/21
Mode 2
:
::
:
Tires diagonal exchanged
步驟
步驟步驟
步驟
操作流程
操作流程操作流程
操作流程
圖示
圖示圖示
圖示
1
Rotate the tires diagonally. To prevent from incorrect
positioning, mark the tires.
2
Press both the setup key and function key simultaneously
for 5 seconds. The display will flash red, and a “beep” sound
will be heard. You can release the buttons, and the system
has entered into mode 1. If press function key again, then
the system has entered into mode 2.
【
【【
【Function】
】】
】Key
【
【【
【Set】
】】
】Key
3
3-1
After entering mode 2, the display will show “2”.
3-2
Numbers show in LED lights stands for tires’ ID, photograph
○
1 and
○
3 means tires position before changing,
photograph
○
2 and
○
4 means after changing.
3-3
The operator only needs to press the setup key for 3
second and listen for the “beep”. This means the mode 2
has been chosen and will exchange all four sensors ID
positions and will automatically return the monitoring status
to normal.