User's Manual

Manual for Tire Pressure Monitoring Systems, TPMS
14/21
Mode 3 ：
：：
： Front tires diagonal exchanged, and Rear tires parallel changed to Front
Step Operation process Photograph
1
Rotate the front tires diagonally to the rear, and the rear tires
parallel to the front. To prevent incorrect positioning, mark
the tires.
2
Press both the
setup key
and
function key
simultaneously for 5 seconds. The display will flash red light,
and a “beep” sound will be heard. You can release the
buttons, and the system will have entered into mode 1. Re-
press function key for 1 second and wait for “beep” then
the LED will show “2”, re-press the you will then see “3”, the
system will have entered into mode 3.
【
【【
【Function】
】】
】Key
【
【【
【Set】
】】
】Key
3
3-1
After entering mode 3, the display will show “3”
3-2
Numbers show in LED lights stands for tires’ ID, photograph
○
1 and
○
3 means tires position before changing,
photograph
○
2 and
○
4 means after changing.
3-3
The operator only needs to press the setup key for 3
second and listen for the “beep”. This means that mode 3
has been chosen and will exchange all four sensors ID
positions and will automatically return the monitoring status
to normal.