OB1 SERIES USER MANUAL OB1 SERIES USER MANUAL BASS GUITAR AMPLIFIER V1.
OB1 SERIES USER MANUAL INTRODUCTION In 1968, Orange founder and CEO Cliff Cooper borrowed £50 to start a musical instrument shop and recording studio in London’s West End. Against the backdrop of one of the city’s most vibrant districts, the shop was decorated with psychedelic script and painted a bright shade of orange which gave the company its name.
OB1 SERIES USER MANUAL IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
OB1 SERIES USER MANUAL BEFORE USING YOUR AMPLIFIER IMPORTANT! The voltage selector switch and mains fuse are set at the factory for the country or region in which this Orange product is intended to be sold. To prevent serious damage to the product, ensure that the rated AC mains voltage indicated on the product's rear panel agrees with the mains voltage from your AC mains outlet before connecting the supplied IEC power cable.
OB1 SERIES USER MANUAL FRONT PANEL FEATURES BASS MIDDLE Adjusts the high-end frequencies with +/-20dB of boost or cut. Higher Gain and Blend settings will also add high-end frequencies and harmonics. Reduce the Treble to compensate if desired. Adjusts the overall volume level. FOOT SWITCH Adjusts the mid-range frequencies with +/- 15dB of boost or cut. The EQ controls are located after the Blend control for fine control over your overall sound. Connect a latching footswitch (e.g.
OB1 SERIES USER MANUAL REAR PANEL FEATURES 1 2 3 4 5 6 1 BALANCED OUTPUT 8 7 Sends a balanced, line-level signal (post-EQ, post-Blend, pre-Master Volume) to a mixer and/or PA system. Engage/depress the ground LIFT/GND button if ground hum becomes a problem when connecting the amplifier to external equipment. Note: A speaker must remain connected to the Speaker Outputs when the DI Output is in use.
OB1 SERIES USER MANUAL WARRANTY INFORMATION All Orange amplifiers are covered by a conditional, non-transferable manufacturing warranty, which covers the product against defects in materials and workmanship for one year from the date of purchase. You can extend this warranty for a further year for free by registering your purchase on our website. Please retain all documents and proof of purchase/receipt for your records. Full details, terms and conditions can be found on our support pages.
OB1 SERIES USER MANUAL (GET BLENDING) V1.
