Instruction Manual

RRE 510 A 810 A 1010 A 1310A 1510 A 1810 A

INSTALLING INSTRUCTIONS

This heater can be used freestanding or wall-mounted.

Free-standing:

1. When used in freestanding position, it must be standing in a vertical position. Do not place the

heater on instable surfaces, such as bed, carpets etc. and do not use the heater on uneven position,

where the heater can tip-over-otherwise there is a risk of fire.

2. Allow ample space around the heater. A safe area to be left free is 15 cm at the sides, and 20 cm at

the front

How to install the feet:

Insert the edges of the bottom of the radiator into the feet support as show in (see below figure 1, fig.1.1 and

form) as below. You will hear a click to indicate that the installation was a success.

ATTENTION: When installing the appliance on its support feet, place it on a surface that supports high

temperatures.

Fig. 1 fig.1.1

Model

Feet Position

First feet

Second feet

RRE 510 A

1 3

RRE 810 A

1 5

RRE 1010 A

1 6

RRE 1310 A

1 7

RRE 1510 A

RRE 1810 A

1 10

WALL MOUNTING:

1. Follow the minimum safety distances for installation.

IMPORTANT: In order to avoid material damage, if you choose to mount your transmitter on the wall, be

sure to follow the instructions on the safety distance between the device and the surface. If you install

the device on its support feet, make sure that the surface can withstand temperatures of up to 90°C.