User's Manual

ORBI PRIME
QUICK START GUIDE
Version 1.0
March 2019
Insert MicroSD Card with Speed Class V30 (U3)
or higher, formatted to the FAT32 file system.
Power On for the first time: Click the MODE
button and then press the POWER button for 2
seconds.
Download our app via the QR code below, and
pair the device via WiFi using its unique name
and the password shown here:
You’re ready to go!
QUICK START TIPS
2
WARNING
To get the full information about ORBI Prime
please read the User Manual available at:
orbiprime.com/ORBI-Prime-User-Manual.pdf
Do not try to fold the temples of the
glasses, because it will break the device:
3
WHAT’S IN THE BOX
ORBI Prime Glasses
USB charging cable
Rear strap
Water resistant EVA Case
Carabiners
Belt
Lens cloth
Replaceable nose pieces
4
DEVICE LAYOUT
Cameras
Nose piece
Rear strap
Inner LED indicators
SHUTTER button
USB charging slot &
MicroSD Card Slot
Battery charging
status LED
Firmware burn
status LED
MODE button
WIFI button
POWER button
Camera
Outer LED indicator
Microphone
5
A memory card must be inserted into the
ORBI Prime in order to record videos or
take photos.
ORBI Prime supports MicroSD Cards
Speed Class V30 (U3) and higher,
8-128Gb, formatted to a FAT32 file system.
HINT: You can use the utility on our website
to format your MicroSD card:
orbiprime.com/fat32.zip
INSERTING MICROSD CARD
WARNING: Memory cards are sold
separately
MICROSD
CARD
GETTING STARTED
6
POWER ON
Before first use, activate ORBI Prime. Click the
MODE button once, then press the POWER
button for 2 seconds to turn on the device.
From then on, press and hold the POWER
button for 2 seconds to turn ORBI Prime on or
CHARGING THE BATTERY
Plug the small end of the charger into the
MicroUSB socket on the ORBI Prime and
plug the large end of the charger into an
electrical socket.
RECORDING VIDEO / PHOTO
WITH THE ORBI PRIME WITH-
OUT MOBILE DEVICE
7
RECORDING VIDEO
- Turn on the device.
- Press the SHUTTER button to start recording.
- Press the SHUTTER button again to stop
recording.
TAKING PHOTOGRAPHS
- Turn on the device.
- Press the MODE button to switch to
photo capture mode.
- Press SHUTTER button to take a photo.
RECORDING VIDEO / PHOTO
USING MOBILE APP
1. Download and install the ORBI 360 app.
2. Pair your eyewear with the phone. With
the eyewear turned on, connect to it via
Wi-Fi.
3. Use the mobile app to take photos or
videos.
RECOMMENDATIONS
8
PUT ORBI PRIME ON OVER YOUR HAIR
HOW TO PLUG IN THE STRAP
9
USING THE HEADBAND
Copyright (C) 2018 ORBI Prime
Ver 1.0
March 2019