Buds True Wireless Ear Headphones User Manual
Contents 1. Product Overview------------------------------------------------------------------- 1 2. Basic operating functions--------------------------------------------------------- 2 3. Bluetooth Pairing and Connection --------------------------------------------- 4 4. Earbud LED Indicator ------------------------------------------------------------- 5 5. Remaining Power in the Charging Case LED Indicator------------------- 6 6.
1.
2.Basic operating functions Button Function Power On Power Off Multifunction button Operation instruction The headset can be turned on by opening the cover in the charging box (it will be automatically connected to the last connected device if there is pairing record). 1. Put the earphone into the charging case to turn it off. 2.10 minutes no connection or battery voltage lower than 3.0V. 3. When disconnected, click the multi-function key 3 times to clear the pairing shutdown.
Volume Down Hold down the "multi-function button" on the left earbuds more than one second to reduce the volume. Answer a call Press the "multi-function button" to answer the incoming call (either of earbud). Hang up a call Press the "multi-function button" to hang up the ongoing call (for both of earbuds). Reject a call Long press the “multi-function button” for 1 second to reject the incoming call (for both of earbuds).
3.Bluetooth Pairing and Connection For the first connection, pick out the earbuds from the charging case, and the earbuds automatically enters the Bluetooth pairing (main earbud blue LED blinks; No LED for secondary earbud lights). In case there were connection record before, by turning on the earbuds, the pairing is restarted to connect back.
4.
5.
6.
7.Charging When the Orbic Buds’ battery remains low, red light blinks. Charge the earbuds immediately. It takes 2 hours around to be fully charged. When the red light turns off, the battery is fully charged. A. Earbuds charging Plug the earbuds into charger box, close the cover to charge the earbuds. B. Charging case charging Connect the USB connector of the micro-USB charging cable to the charging box to charge the charging box.
8.Product Specification Bluetooth Version Bluetooth V5.2 Bluetooth Chipset BT8926B Communication Distance 10 meters Operation Range Up to 10 meters Bluetooth Protocols HFP, HSP, AVRCP, A2DP CODEC Code SBC,AAC Earbuds：About 3.5 hrs @ 70% volume Talking Time Use with charging case：About 10.5 hrs @70% volume Call the noise reduction Single microphone ENC call Earbuds：About 5 hrs @70% volume Music Time Use with charging case：About 15 hrs @70% volume Stand-by Time About 45 hrs Earbuds：3.
9. Cautions and Q & A A． How to connect back? What should I do if I can't connect back? How to reconnect after long-distance disconnection? In case earbuds are connected to mobile phone successfully, it will automatically connect to the mobile phone every time turn it on. If the connection fails, re-pair the connection. It is required to be able to connect back within 10 minutes. After 10 minutes, it will automatically shut down.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
