User's Guide

38 39
Mode User Capability
Transmission/
Receiving Mode
When making
communications with
a non-TTY terminal
TTY Off
TTY Full
For hearing/verbally
impaired
Text message
transmission, text
message receiving
Operator required
TTY + HCO For verbally impaired Audible
Text message
transmission,
voice receiving
Operator required
TTY + VCO For hearing impaired Able to talk
Voice transmission, text
message receiving
Operator required
Connecting TTY Equipment and a Terminal
1. Connect a TTY cable to the TTY connection on the phone (TTY connection location is the same
as a headset jack).
2. Access the phone’s Settings menu and set the desired TTY mode.
3. After setting a TTY mode, check the screen of the phone for the TTY icon.
4. Connect the TTY equipment to the power source and turn it on.
5. Make a phone connection to the desired number.
6. When connection is made, use the TTY equipment to type in and send a text message or send voice.
7. The voice or text message from the receiver end will appear on the TTY equipment display.
Sound settings
1. From the Home screen, press the OK key Menu, right, down
2. Press the OK key to select Tool & Settings
3. Press the 2 Key settings.
4. Press the 4 Key Sound settings
Volume
1. From the settings menu screen, press the 2 key Master Volume.
2. Select a Volume setting and set the level to your preference using the Volume key up-down and
OK key
Also vibrate for calls off
1. From the Sound settings menu screen, press the 1 key Also vibrate for calls.
2. Use the Navigation key to select On or Off, then press the OK key Set to select it.
3. Press the Clear key to exit.
Phone Ringtone
1. From the Sound settings menu screen, press the 2 key
Phone Ringtone to set the ringtone for calls.
2. Use the Navigation key to highlight a desired ringtone, then press the OK key Set to select it.
Press up and down to listen to a highlighted ringtone.
Press the Clear key to exit.
Vibration pattern
1. From the Sound settings menu screen, press the 3 key Vibration pattern.
2. Use the Navigation key to select Off or Pattern1 to 5, then press the OK key
Set to select it.
3. Press the Clear key to exit.
Notification sounds
1. From the Sound settings menu screen, press the 4 key Notification sound to set the sound played
for new notifications.
2. Use the Navigation key to highlight a desired sound, then press the OK key Set to select it.
• Press the up and down to listen to a highlighted ringtone.
• Press the ok Key to set.
3. Press the Clear key to exit.
Alarm Sound
1. From the Sound settings menu screen, press the 6 key Alarm sound.
2. Use the Navigation key up and down to select , then press the OK key Set to select it.
3. Press the Clear key to exit.
Keypad Volume