Operation Manual

- 49 -
Instruction Manual Athena
English
• To save the modifi cations made, press the [OK] key.
• Press
to exit time confi guration.
• The chronothermostat will now begin to adjust the temperature according to the
automatic operating mode, with the P00 program for Monday to Friday and P01 for
Saturdays and Sundays.
OPERATING STATES
The following operating states have been prepared for the unit:
• Automatic operation
• Manual operation
• Extension program
• Countdown program
AUTOMATIC OPERATION
• After the reset phase, with the date and time confi guration, the unit enters automatic
operation.
• The automatic operation mode is understood as being the state in which the unit
periodically detects the temperatures in the zones for which it has been programmed,
performing the necessary adjustments in accordance with the confi gured programs.
• The screen will display the following information:
date and time
measured temperature (zone 1…4)
daily time program graphic (zone 1…4)
temperature measured by the external sensore
temperature measurement unitt
actuator status (zone 1…4)
possible presence of wireless fi le
possible “exhausted battery” message
temperature zone (Z1…Z4)
measured minimum and maximum temperatures
ESC
ESC
ESC
ESC
ESC
ESC
12
3
4
5
6
789
13 14 15 16 17 18 19 20 21 22 2311 1210
ESC
ESC