Owner manual
110
System specifications*
SYSTEMS FSCAN-4 FSCAN-5 FSCAN-7 FSCAN-9 FSCAN-11 FSCAN-13
Frequency Range 0.5-40 GHz 0.5-40 GHz 0.5-40 GHz 0.5-40 GHz 0.5-40 GHz 0.5-40 GHz
baseline* baseline* baseline* baseline* baseline* baseline*
Antenna Gain 0.3 dBi rms typical 0.3 dBi rms typical 0.3 dBi rms typical 0.3 dBi rms typical 0.3 dBi rms typical 0.3 dBi rms typical
Sidelobe Accuracy 1.0 dB rms typical 1.0 dB rms typical 1.0 dB rms typical 1.0 dB rms typical 1.0 dB rms typical 1.0 dB rms typical
@ -30 dB (relative to peak) (relative to peak) (relative to peak) (relative to peak) (relative to peak) (relative to peak)
Boresight Error 0.05° typical 0.05° typical 0.05° typical 0.05° typical 0.05° typical 0.05° typical
Pattern Range +/- 70° to +/-80° +/- 70° to +/-80° +/- 70° to +/-80° +/- 70° to +/-80° +/- 70° to +/-80° +/- 70° to +/-80°
from boresight from boresight from boresight from boresight from boresight from boresight
typical** typical** typical** typical** typical** typical**
Accuracy X (RMS) 0.005 in 0.005 in 0.006 in 0.007 in 0.007 in 0.007 in
0.13 mm 0.13 mm 0.15 mm 0.18 mm 0.18 mm 0.18 mm
Accuracy Y (RMS) 0.005 in 0.005 in 0.005 in 0.006 in 0.006 in 0.007 in
0.13 mm 0.13 mm 0.13 mm 0.15 mm 0.15 mm 0.18 mm
Planarity (RMS) 0.005 in 0.006 in 0.005 in 0.006 in 0.006 in 0.007 in
0.13 mm 0.15 mm 0.13 mm 0.15 mm 0.15 mm 0.18 mm
Repeatability X (RMS) 0.001 in 0.001 in 0.001 in 0.001 in 0.001 in 0.001 in
0.025 mm 0.025 mm 0.025 mm 0.025 mm 0.025 mm 0.025 mm
Repeatability Y (RMS) 0.001 in 0.001 in 0.001 in 0.001 in 0.001 in 0.001 in
0.025 mm 0.025 mm 0.025 mm 0.025 mm 0.025 mm 0.025 mm
Z-Roll Axis ZR-50*** ZR-50*** ZR-50*** ZR-50*** ZR-50*** ZR-50***
* Up to 110 GHz with MV-Cor
TM
accuracy improvement
** Depending on DUT size and probe-DUT separation
*** See ORBIT/FR Z-Roll Units specication table
Mechanical characteristics*
SYSTEMS FSCAN-4 FSCAN-5 FSCAN-7 FSCAN-9 FSCAN-11 FSCAN-13
SCANNER SUBSYSTEM
Model Number AL-4951-1-4-4-V AL-4951-1-5-5-V AL-4952-1-7-7-V AL-4952-1-9-9-V AL-4952-1-11-11-V AL-4952-1-13-13-V
Scanner Construction Aluminum Aluminum Aluminum Aluminum Steel Steel
Scan Travel X 4 ft 5.5 ft 7 ft 9 ft 11 ft 13 ft
1.22 m 1.68 m 2.14 m 2.74 m 3.35 m 3.96 m
Scan Travel Y 4 ft 5.5 ft 7 ft 9 ft 11 ft 13 ft
1.22 m 1.68 m 2.14 m 2.74 m 3.35 m 3.96 m
Scan Travel X (with Z-roll) 3.2 ft 4.9 ft 6.5 ft 8.2 ft 10 ft 12 ft
1 m 1.5 m 2 m 2.5 m 3 m 3.65 m
Scan Travel Y (with Z-roll) 3.6 ft 5.1 ft 6.6 ft 8.6 ft 10.6 ft 12.2 ft
1.12 m 1.58 m 2.04 m 2.64 m 3.25 m 3.73 m
Payload 50 lbs 50 lbs 50 lbs 50 lbs 50 lbs 50 lbs
23 kg 23 kg 23 kg 23 kg 23 kg 23 kg
Bending Moment 100 ft-lbs 100 ft-lbs 100 ft-lbs 100 ft-lbs 100 ft-lbs 100 ft-lbs
14 kg-m 14 kg-m 14 kg-m 14 kg-m 14 kg-m 14 kg-m
Speed (X & Y) 5 in/sec 5 in/sec 5 in/sec 5 in/sec 5 in/sec 5 in/sec
127 mm/sec 127 mm/sec 127 mm/sec 127 mm/sec 127 mm/sec 127 mm/sec
Motor Drive Power (X & Y) 1/8 hp 1/8 hp 1/8 hp 1/8 hp 1/8 hp 1/8 hp
Height 72.3 in 100.4 in 128.3 in 141.7 in 172.4 in 196.5 in
1,836 mm 2,550 mm 3,260 mm 3,736 mm 4,380 mm 4,990 mm
Width 72.3 in 94.5 in 121.5 in 141.2 in 165.1 in 189.1 in
1,836 mm 2,400 mm 3,086 mm 3,586 mm 4,194 mm 4,803 mm
Depth 29.5 in 29.5 in 29.5 in 29.5 in 39.4 in 39.4 in
750 mm 750 mm 750 mm 750 mm 1,000 mm 1,000 mm
Anechoic Treatment AEP-4* AEP-4* AEP-6* AEP-6* AEP-6* AEP-6*
* Absorber treatment according to the desired frequency range - See the MVG-EMC Systems catalogs for more information
5
I FScan