Introducing Push Fittings Fittings rotate 360º Replaces PVC fittings without the glue and primer! no glue Needed! Simply insert pipe into fitting for a permanent, leakfree connection FAST CLEAN EASY Instant connection—No waiting for glue to dry! No harmful glue or solvents needed! Simply push on and swivel to desired orientation! 98606-01 rC *For cold water, outdoor irrigation connections only–Max 150 PSI. Keep O-rings free of dirt and debris. Do not insert fingers.
How does pvc-lock® work? Where is pvc-lock® used? Stainless steel retainer ring PVC pipe Use ¾" or 1" PVC-Lock® fittings to run ¾" or 1" PVC pipe and carry water to the valves and out to sprinkler lines. O-ring seal When PVC pipe is inserted, the O-ring seals around the pipe and the stainless steel ring 'locks' the pipe in place. Use PVCLock® × FPT fittings for adding flex pipe or risers for sprinklers.
pvc-lock® MAKES INSTALLATION AND REPAIRS FAST, EASY, AND CLEAN. Sprinkler line connections are easy— simply insert pipe and go! Works with ½" Eco-Lock® swing pipe and fittings and adapts to flex pipe. Adapts for rigid, flex, or shrub risers. Easily connect to valve manifolds. *For cold water, outdoor irrigation connections only–Max 150 PSI. Keep O-rings free of dirt and debris. Do not insert fingers.
Advertencia: Para uso en conexiones de irrigación en exteriores, con agua fría solamente - Máx 150 PSI. Conserve las juntas tóricas limpias sin tierra ni desechos. No inserte los dedos.
PRESENTAMOS Conector a presión Los conectores giran 360˚ ¡Reemplaza los conectores de PVC pero sin el pegamento y la pintura base! ¡No requiere pegamento! Simplemente inserte la tubería en el conector para una conexión permanente y sin filtraciones RÁPIDO LIMPIO FÁCIL Conexión instantánea.
¿CÓMO FUNCIONA PVC-LOCK®? ¿DÓNDE SE UTILIZA PVC-LOCK®? Anillo de sujeción de acero inoxidable Utilice conectores PVC-Lock® de 1" o ¾" para conectarse a la tubería de PVC de ¾" o 1" y para llevar el agua a las válvulas y a las lineas de regadores. Tubo de PVC Sello con junta tórica Cuando se inserta la tubería de PVC, el sello con junta tórica alrededor de la tubería y el anillo de acero inoxidable "traban" la tubería en el lugar.
PVC-LOCK® HACE QUE LAS INSTALACIONES Y REPARACIONES SEAN RÁPIDAS, FÁCILES Y LIMPIAS. Las conexiones de línea de regadores son fáciles. ¡Simplemente inserte la tubería y listo! Funciona con conectores y tuberías giratorias de ½" Eco-Lock® y se adapta a las tuberías flexibles. Se adapta a los elevadores para arbustos, rígidos o flexibles. Se conecta fácilmente a los tubos colectores de la válvula. *Para uso en conexiones de irrigación en exteriores, con agua fría solamente - Máx 150 PSI.
½" Release Tool 06016 Conector en T de ¾" x 1" 38684 Codo de 1" 38673 Acoplador reductor de 1" x ¾" 38677 Adaptador de 1" x 1" MPT 38678 Tapa de 1" 38680 Conector en T de ¾" x ½" FPT 37772 Codo de ¾" 37774 Codo de ¾" x ½" FPT 37775 1" Slide Repair Fitting 38674 ¾" Slide Repair Fitting 37783 ½" Slide Repair Fitting 36783 Conector en T de ¾" 37770 pvc-lock® RELEASE TOOLS Acoplador de 1" 38676 ¾" Release Tool 07015 Conector en T de 1" x ½" FTP 38671 1" Release Tool 08195 Conector en T de 1" 38