Users Manual

Safety
Before using the OrCam MyMe device, read the following precautions carefully to avoid
dangerous situations and to ensure ideal performance of your OrCam MyMe device.
Handle your OrCam MyMe device with care. It can be damaged if dropped, burned,
punctured, or crushed. Do not open the device.
The OrCam MyMe device is designed to work in ambient temperatures between 32°
and 104°F (0° and 40°C) and in normal conditions (Relative Humidity of 10% to 90% RH
and Atmospheric Pressure of up to 2000m above sea level (700hPa)). The device can
be damaged if used outside of this range. Store and transport in a cool, dry place (32°
to 104°F (0° to 40°C) and Relative Humidity of 5% to 90% and atmospheric pressure of
700hPa to 1060hPa)).
The OrCam MyMe device is water resistant but not waterproof. This means that it can
withstand light rain or drizzle for short periods of time, although it is not recommended,
as long as the device is covered and protected. Do not use the OrCam MyMe device
in heavy rain, when at the beach or swimming pool, or in or near a bathtub or shower.
Do not submerge the OrCam MyMe device in any type of liquid. IP Code: IP22. Do not
expose the device to chemicals, such as household cleaners, aerosol sprays, solvents,
alcohol, or ammonia. If you experience an allergic reaction to any of the elements of the
OrCam MyMe device contact a medical professional.
Should you have a problem operating the OrCam MyMe device and believe there is
something wrong with the device, do not attempt to repair it by yourself. Only qualied
OrCam personnel may repair or service your device. Unauthorized repairs may void your
warranty.
Do not attempt to replace the battery; you may damage it, which could cause
overheating and even injury. The battery is designed to last for two years of average
use (one charging cycle per day on average) after which it may need to be replaced.
Use only the charger supplied with your OrCam device. Using another charger may void
your warranty and could cause severe injury. During charging, a distance of at least 2
cm. between the equipment and all persons should be maintained for the duration of
operation of the equipment.
Do not force a connector into a port or apply excessive pressure to a button. This may
cause damage that is not covered under the warranty. If a connector does not insert
easily, check for obstructions in the port and verify that you have the correct connector
for that port. Do not combine with software, hardware, or other equipment not supplied
by OrCam. Exposing the OrCam MyMe device to magnetic elds may damage the unit
or erase your data.
When you are using the OrCam MyMe device or charging the battery, it is normal for the
device to get warm. If the device becomes excessively hot, leaks, or gives off a burning
smell, turn the device off immediately and contact OrCam support.
NOTE – Product ambient temperature range when charging is from 0 to 35°C.