User Manual

31.
30.
Settings.
Some of the OrCam MyEye features are disabled by default. It is best to go into
the audio settings menu to enable these features should you choose to do so.
Audio Settings Menu.
You can customize your OrCam’s settings via the audio settings menu, or via the
OrCam app
(currently only available to iPhone or iPad users).
- There are three ways to enter the audio settings menu:
- Double tap the touch bar and say after the long beep, “Enter the user menu”.
- Press and hold down the power button, swipe your nger along the touch bar,
and then release the power button.
- Use the pointing gesture to read the following command:
OrCam Please Enter User Menu
- While in the audio settings menu, follow the audio instructions to browse and
select through the settings. Tapping the touch bar conrms the selected option;
swiping along the touch bar browses through the options. Double tapping the
touch bar either makes the device go back to the main menu or exits the audio
settings menu.
- If you do not make a selection, the device will repeat the same message. If no
action is made before 30 seconds transpire, the device will automatically exit the
audio settings menu.
Audio Settings Menu Layout
- Reading Rate Menu
- This is how fast your device reads text. You may choose reading rates between
100 - 300 words per minute.
- Volume Menu
- You may set the volume level between 1 to 10, with 1 being the lowest setting
and 10 being the highest setting.
- You may also set the volume outside of the audio settings menu at any time the
device is awake yet not being used (not in Suspend mode) either using a vocal
command or manually.