Instructions

How do you like them apples?
Thank you for your support!
Starkrimson® Stereo Ultra Instructions
Danger High Voltage:
The amplifier outputs (speaker terminals) can be up to 80V, do not touch while the amplifier is
on.
Notes:
1. Do not make or break the connections to the amplifier while it is on.
2. Due to the bridged amplifier design both speaker terminals are hot when the amplifier is
on.
• Do not connect any of the speaker terminals to ground/earth ground.
3. There are no user-serviceable parts, opening the amplifier will void the warranty.
To turn the amp on:
1. Connect Speakers.
2. Connect Input (XLR or RCA).
3. Plug-in power cord into the amplifier.
4. Turn it on by pushing the power button on the front, the blue light will illuminate.
• It may take up to 30 seconds for both amplifier channels to become active.
To turn the amp off:
1. Turn off by pressing the power button on the front (blue light will turn off), and wait at
least 1 minute for capacitors to discharge before removing connections.
12V Trigger Operation (Optional)
When your order the amplifier with this option it will not function without a 12V trigger.
To turn the amplifier on first push the button on the front and then have the trigger (12V) activate
it. Both a button press (blue light) and trigger must be present for the amplifier to turn on.
• It may take up to 30 seconds for both amplifier channels to become active.