User manual 4K OPTICAL VIDEO CAMERA
Overview Thank you for purchasing this portable digital video camera, this camera features video recording at 4K. With resolution of 2880*2160, it adopted Sony 1/3-inch image sensor,H.264 video encoding format, the video file storage usage is small while it has high image quality! You can connect your camera via Wi-Fi using your smart Phone remotely, to view the camera live screen and use your phone to record or shooting.
Table Of Contents Getting to Know Your Camera....................................................... 1 Standard Accessories...........................................................1 Charging the Battery.............................................................1 Component Introduction.......................................................2 Inserting an SD Card............................................................ 4 Loading Battery....................................................................
Getting to Know Your Camera Standard Accessories 4K Ultra HD Camera Battery Charger USB Cable DV Pouch Infrared remote control HDMI Cable User Manual Warranty Card Charging the Battery Before using the camera, you must load and charge the battery Connect to 100-220V socket Note:Insert the battery into the charger to charge it, the indicator light will be red when charging; The indicator light will turn green when the charging is completed.
Component Introduction A. ② ③ ④ ① ⑤ ⑥ 000 ⑦ ⑧ ⑨ ⑩ ⑪ ⑬ ⑫ For the function description of the related parts in the above figure, please refer to the following table. No. Name Function description ① IPS Panel Screen preview and video/photo playback. It supports 270° rotation. ② Speaker ③ Power Button Back sounds and keystrokes. Power On/Off.
In video/Photo Mode, pull left/ right to zoom in/out. It also can be "Options" button when choosing functions. ④ T/W Zoom Button ⑤ Photo Button In photo mode, press to take photo. It also can be "OK" button when confirming functions. ⑥ Status Light Charging indicator and working indicator. ⑦ Recording Button 1.Recording/stop video. 2.Stop playback when the video is Playing.
B. ① ② ③ For the function description of the related parts in the above figure, please refer to the following table. No. Name ① LED light ② Lens ③ Infrared remote-control receiver Inserting an SD Card Function description Lighting assist. Framing. Receiving remote command.
1.Open the Battery cover. 2.Insert the memory card in the direction shown until you hear“Clicks”. 3.Close the Battery cover. ※Open the Battery cover and press the memory card. Note: 1.When using for the first time, format the SD card On this unit. The SD card needs to be U1. 2.Do not forcefully remove the SD card while working, otherwise it may cause loss of files or machine damage. Loading Battery 1.Open the Battery cover. 2.inserts a lithium battery. 3.Close the battery cover.
Getting Started To turn on the camera, press the power button or turn on the screen. The camera will enter the main interface. Select “Mode” to enter the main interface of mode options.
Name Function Description Resolution Choose the resolution according to your needs. AWB Choose different white balance functions according to the environment: Auto, Daylight, Cloudy, Florescent, Tungsten. Color Choose different scene color according to your needs: Standard, Sepia, Monochrome, Vivid. Exposure Adjust the exposure value according to the environment：+3、+2、+1、0、-1、-2、-3。 Metering Choose different metering modes according to your needs：Multi、Center、 Spot.
1.Select “Video” in mode to enter the preview interface 2.By selecting “Menu” to enter the menu, you can set Resolution, White-Balance, Exposure and other functions or parameters according to your needs. 3.Press the “Video” button to start recording. You can use the T/W zoom key to zoom in or out, and you can turn on/off the LED light during the recording process. 4.Press the “Photo” button to PAUSE recording. 5.Press the “Video” button again to STOP recording. 6.
Name Function Description Resolution Choose the resolution according to your needs. Capture Mode According to your needs, choose the 2s timer/ 5s timer/ 10s timer for Selfie. Anti-Shake This function can help to effectively reduce the image shake caused by vibration Face Detect This function can help to detect and focus on the face priority when shooting.
Macro This function allows you to switch to Macro mode, the focusing distance is 0.1-1 M. Burst Mode By turning on this function, you can take three consecutive photos.
Playback To play back recorded videos and photos on the camera ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑩ ⑨ No.
⑧ Menu ⑨ Return to the main interface of mode options ⑩ Remaining battery capacity 1.Select “Playback” in the mode options to enter playback mode 2.Use “T/W” zoom key to switch the file preview, click to switch to the thumbnail preview mode. Click to delete current photo/video 3.When browsing photos, click or to zoom in or out. 4.When playing video: Click or the “Photo” button to start/pause. Use the “T/W” zoom key to adjust the volume. To stop the playback, press the “Video” button. 5.
photo/video preview interface. 2.Click or “Menu to select “3 sec”/ 5 sec”/ 10 sec” playback interval 3.Click to start the slide show” 4.Press the “Photo” button to stop playing. Setting Through this setting menu, you can customize the functions and parameters such as language, date, frequency, etc.
reaches the specified time, it will automatically shut down. Frequency Different countries have different grid frequencies. Date on/off watermark, custom date and time Format This function allows you to format the memory card. Default This function can restore the camera to the default settings Connecting to the Computer This function allows you to use your camera as a MSDC disk or PC Camera MSDC Mode 1.Power on the camera and enter the standby mode.
2.Connect the camera and computer with the cable. 3.The screen will display two options: “MDSC”and “PC Camera”. 4.Select the “MSDC ” by“T/W Zoom Button” . 5.Press “Photo Button” to confirm. PC Camera Mode 1.Power on the camera and enter the standby mode. 2.Connect the camera and computer with the cable. 3.The screen will display two options: “MDSC”and “PC Camera”. 4.Select the “PC Camera ”by “T/W Zoom Button” . 5.Press “Photo Button” to confirm.
1.Press the power button or open the screen to turn on the camera and enter the standby state. 2.Take out the HDM cable and connect the camera with the HDMI connector of the TV. 3.Turn the TV to the HDMI channel, the preview screen will appears on the TV.
2.Open your phone and open the Wi-Fi search the name with HDVxxxxxx, Enter the password : 12345678 . 3.Enter the APP, touch“ Camera”. Note:The Wi-Fi function is a point-to-point wireless connection with a limited distance. The maximum distance is about 10 meters. Please use this function within the effective distance.
Setting Back Lens Preview Battery Status Photo Mode Playback Resolution Record mode Resolution Setting Record/Photo Button App Functions You can remote control the camera to record, photo taking, playback and parameter setting on the APP APP Video Mode 1.Touch the on the App user interface to enter the Video mode. 2.Touch the icon , “REC” will be displayed at the top Right of the interface and flashes on the live preview., Start recording. 3.Touch the icon again, Stop recording.
APP Photo Mode 1.Touch the on the App user interface to enter the Photo mode. 2.Press the icon in live preview mode,the app will sound "click". 3.Finished. APP Setting This setting function allows you to customize the parameters of the camera, such as the resolution, audio recording, and date Press the menu.
Format YES/NO Surplus Space Firmware Version View the storage of camera Camera Version APP Play Back Through this function, the recorded video and photos can be played online on the APP and downloaded to the phone. A.Photo 1.Press the on the App user interface to enter the Play Back mode. 2.In the main interface of the playback, select “Photo” to enter the thumbnail preview interface. 3.Select anyone of the document thumbnail to play. 4.
3.Select anyone of the document thumbnail to play. 4..Touch want to in the upper right corner to select any file you delete or download to the local album. C. Album 1.Press on the main interface to enter the local album. 2.In the main interface of the playback, select “Video” or”Photo” to enter the thumbnail preview interface. 3.Select any one of the document thumbnail to play , delete or share it to the social media by touching.
Technical Parameters Sensor Aperture Lens Focus Range Lens Type Zoom External Storage 5.0MP CMOS F：2.8 F=4.95～49.5mm Standard:1.5m～infinity Macro:0.1-1m Optical zoom lens 10X Support SD Card(U1)，Maximum 128GB Screen 3.
USB Port USB2.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
