AirInstinct Air Purifier TM User’s Guide Model: AIR75B Important! Read this manual carefully, and keep for future reference.
Enjoy Congratulations on your purchase of the Oreck AirInstinctTM Air Purifier. Use this manual to learn the features, operation and maintenance of the Oreck Air Purifier. Welcome to our Call. Click. customer service program. To speak with an Oreck representative call: Call USA: 1•800•989•3535 Canada: 1•888•676•7325 Click On the web, point and click at: www.oreck.com and click locate a store on the top right.
Contents Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 General Warnings . . . . . . . . . . . . . . . . . . . . . . . 4 Placement Warnings . . . . . . . . . . . . . . . . . . . . . . 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Cleaning and Filter Replacement Intervals . . .
Safety General Warnings ! IMPORTANT SAFETY INSTRUCTIONS Cleaning the unit while it is plugged in may result in electric shock, electric spark and serious injury. Unplug the unit before cleaning or maintenance WARNING: To reduce the risk of fire, electric shock or injury, read and understand this user guide before operating this appliance. • Do not operate unit if cord or plug is damaged. Doing so can result in electric shock.
• Do not use in an area where toxic vapors, flammable dust or oxygen tanks are present. Check the location and make sure these elements are not present. • Warning: Product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. • Do not place open flames, including candles, directly in front of the air purifier. • It is important to keep all objects away from the air intake grille. • Place the air purifier on a flat, solid, stable surface.
Features 1. Display Panel: Air purifier controls and indicator lights. 2. Power Button: Turns the purifier On and Off. 3. AUTO Mode and Speed Button: Auto Mode automatically adjusts the fan speed. Speed button manually sets the fan speed to low, medium or high. 4. Check Filter Light: Indicates the filters may need to be replaced. 5. Air Indicator: Visually displays either a blue, purple, or red light based on the level of particles detected by the Air Sensor. 6.
10. Exhaust Grille: Directs the flow of air as it exits the unit. 11. Power Cord: Plug into the outlet to begin use. 12. Pre-filter: Filters large particles such as dust, hair and lint that pass through the filter. 13. Odor Filter: Reduces odors and VOC’s from the air that passes through the filter. 14. HEPA Filter: Captures dust, allergens, pet dander, mold and smoke from the air that passes through the filter.
Operation Note: Make sure to open cover and remove each filter’s plastic packaging before turning unit on. Order of filters: pre-filter, odor filter, Hepa filter 1. Place. Place the air purifier on a solid surface. Do not block the grille with objects and remove candles or flames near the unit. 2. Plug In. Plug into the nearest standard electrical outlet that accepts a polarized plug. 3. Press. The power button turns the purifier On.
Maintenance Manual Mode A. Press and release the speed: Lowee , Medium button for the desired fan , High . B. The indicator lights will display the speed. A B Automatic (AUTO) Mode Important: The Air Sensor is set to standard sensitivity when shipped from the factory. If you prefer the air purifier to adjust its speed more or less frequently, you can set the sensitivity of the Air Sensor (see page 14). to to setset the the purifier in automatic mode. A.
! WARNING! Cleaning the unit while it is plugged in may result in electric shock, electric spark and serious injury. Unplug the unit before cleaning or maintenance Cleaning and Filter Replacement Intervals Proper care and cleaning of the air purifier is critical to performance. The following chart shows the recommended cleaning intervals and method. Part Time Method Cabinet As needed Wipe with damp cloth first. If required, follow with mild, non-abrasive cleaner.
Replacing the Filters IMPORTANT: A lways remove the protective plastic packaging from the filter before installing the filter. 1. Unplug the air purifier. 2. Open the cover by gently pulling from the bottom corners. 3. Press the two hooks above the pre-filter, pull straight out of the cabinet. Remove the used odor filter and HEPA filter. Thoroughly rinse the pre-filter and let it air dry before placing it back in the cabinet. Note: Do not use heated or compressed air as part of the drying process. 4.
Filter Reset Mode 1. When the indicator light comes on, the odor, Hepa or both indicator lights will illuminate; indicating which filter needs to be replaced. 2. After installing a new or replacement filter, press and hold the reset button for approximately two seconds. 1 2 Forced Reset Mode If you have replaced a filter before the filter replacement light is illuminated: 1. Press and hold the reset button for 2 seconds. 2. Push the reset button to select the desired filter to forcibly reset.
Cleaning the Air Sensor ! WARNING! Cleaning the unit while it is plugged in may result in electric shock, electric spark and serious injury. Unplug the unit before cleaning or maintenance 1. Open the air sensor cover on the side of the product. 2. Clean the air inlet, outlet vents, and air sensor. Air outlets Air inlets 3. Wet a cotton swab lightly and clean the lens, dust inlet, and dust outlet. After cleaning, use a dry cotton swab to remove any moisture.
Adjusting the Air Sensor The purifier is shipped with the Air Sensor set to standard sensitivity. Adjust the sensitivity of the sensor if you want the air purifier to adjust its fan setting in Auto Mode to more or less frequently. To adjust the sensitivity of Air Sensor: 1. Turn the power On. 2. Press and hold the Auto/Speed button for two seconds. 3. The speed indicator blinks according to the current sensitivity of the air sensor. 4. Press the Auto/Speed button for the desired sensitivity.
Troubleshooting Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing, this guide. All other servicing should be done by an Oreck authorized service center. Problem Check Unit does not turn ON. No air is blowing. Airflow speed is weak. Solution • Power Cord • Plug in power cord. • Cover • Make sure that the cover is securely closed. • Power Cord • Check electrical outlet. • Plug in power cord.
Warranty ORECK MANUFACTURING COMPANY: (Oreck Manufacturing Company gives you the following limited warranty for this product only if it was originally puchased by you for residential use, not for resale, from Oreck or an Oreck Authorized Retail Dealer.) Oreck will repair or replace, free of charge, to the original purchaser, any part that is found to be defective in material or workmanship within three (3) years following the date of purchase for all residential models.
© 2011 Oreck Holdings, LLC. All rights reserved. All marks, text, logo’s, product configurations and registered trademarks are owned and used under the authority of Oreck Holdings, LLC.
