S I M P L Y A M A Z I N G ® USER’S GUIDE COMPACT AIR PURIFIER Air Compact Series •IMPORTANT• SAVE THIS BOOKLET! Includes: • Warranty • Safety Warnings • Parts List • Operating Instructions • Accessories List • Trouble Diagnosis
BEFORE OPERATING AIR PURIFIER, READ ALL INSTRUCTIONS IN THIS MANUAL CAREFULLY. CAUTION Installing a wet or even damp Collection Cell into the Air Purifier may cause melting of internal components during use. Table of Contents • DO NOT place a wet or damp Collection Cell in the Air Purifier. Important Safety Instructions, Polarized Plug Notice, Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Oreck’s liability for damages to you for any costs whatsoever arising out of this statement of limited warranty shall be limited to the amount paid for this product at the time of original purchase, and Oreck shall not be liable for any direct, indirect, consequential or incidental damages arising out of the use or inability to use this product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Operation ● Your Air Purifier works best if you leave it in operation continuously, and it provides multiple settings for convenient use at any time. 1. MAIN POWER SWITCH: Turn the unit on by sliding the power switch to the fan speed you prefer (fig. 2): ( • • • ) for maximum cleaning ( • • ) for medium cleaning ( • ) for low cleaning Each setting uses a different fan speed, changing the air flow through the Collector Cell.
Replacing Cell After Cleaning 5 1. Snap in the Charcoal Odor Absorber (fig. 5). 2. Slide in the Pre-Filter (fig. 6). 3. Slide Collector Cell into cabinet, using handles (fig. 4). 4. Replace front grill. Unit is now ready for operation (fig. 3). NOTE: An occasional snapping or popping sound (“arcing”) is normal when operating the unit immediately after cleaning the Collector Cell and should stop after a few minutes of operation.
Troubleshooting Guide Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing the chart below. It pinpoints problems and how to correct them. Remember, check the simple things first. PROBLEM CHECK UNIT DOES NOT TURN 1. Power Cord ON 2. Selector Switch 3. Front Grill WHAT TO DO 1. Plug in power cord 2. Set selector switch for desired fan speed. 3. Reinsert front grill until it is flush with cabinet front.
© 2005 Oreck Holdings, LLC. All Rights Reserved. All word mark, logos, product configurations, and registered trademarks are owned and used under the authority of Oreck Holdings, LLC.
