S I M P LY A M A Z I N G® User’s Guide SPEED SWEEP Model Tek100 •IMPORTANT• SAVE THIS BOOKLET! Includes: Important Safety Instructions Warranty Operating Instructions REGISTER YOUR PRODUCT ON THE WEB: WWW.ORECK.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARNING To reduce the risk of fire, electric shock, or injury: • Do not use outdoors or on wet surfaces. • Do not expose to rain, store indoors. • Do not allow to be used as a toy. Close attention is necessary when used by children. • Use only as described in this manual.
Safety Warning 1. Be sure to use the product in compliance with the contents of this manual, and use approved Oreck replacement parts. 2. After unpacking, make sure that the appliance is intact with no visible signs of damage caused during shipping. If damage has occurred, do not use this product. Take it to an authorized Oreck Clean Home Center for service. All packing materials (plastic wrapping, cardboard box, etc) are potentially dangerous and must be kept out of children’s reach. 3.
Warranty ORECK MANUFACTURING COMPANY: (ORECK gives you the following limited warranty for this product only if it was originally purchased for use, not resale, from ORECK or an ORECK Authorized Retail Dealer.) ORECK will repair or replace, free of charge, to the original purchaser, any part which is found to be defective in material or workmanship within one (1) year of the date of purchase. This limited warranty applies to normal domestic use.
Parts & Accessories List 1. Handle 2. Upholstery brush 1 3. Crevice tool 4. Accessory hook 2 5. Handle button 6. Battery release button 7. 2 Battery compartment 3 8. Power button 9. Carry handle 10. Dirt Cup 5 11. Roller brush release button 12. Roller brush 13.
Assembly Instructions Before assembling, please be sure that all parts and accessories are included by reviewing the Parts and Accessories List. Dirt Cup Assembly As is shown in the Figure below, place the toll bar of the dust barrel on the back of the unit, and press down the dirt cup. When the front-end hook on the dirt cup is placed into the corresponding part on the unit completely, press firmly until a “click” is heard confirming it is securely in place.
Assembly Instructions Assembly of Roller Brush As is shown in the figure below, carefully insert the roller brush into the unit, making sure to align within the specific guide slots and ensuring electric contacts are fully aligned. Electrical contacts Guide slots Assembly of the Handle As shown below, pressing the handle release button will allow for the handle to be removed from the main unit. To reinstall, simply reinsert the handle making sure the guide slots line up.
Assembly Instructions Operation 1. It is necessary for the rechargeable battery to be fully charged prior to use. 2. The charger is uniquely designed for the rechargeable Ni-MH battery, rating: Input: 120V, 60 Hz, 50mA; Output: 9V DC, 280Ma; Class: 2 3. After inserting the plug of the charger into the electrical socket, the power light (green) will illuminate. Insert the rechargeable battery module, this will cause the charge indicator light (red) to blink.
Assembly Instructions Accessory Items Included with this unit are two accessory items: a crevice tool and upholstery brush. A) Crevice Tool Shown below, the crevice tool is attached for cleaning in tight spaces. B) Upholstery Brush With the crevice tool still attached, affix the upholstery brush to the end of the crevice tool as indicated below.
Maintenance 1. Dirt Cup Filter After emptying the dirt cup as described above, the filter can also be cleaned at the same time. By grasping the filter screen guard in one hand, use the opposite hand to rotate the handle as indicated by the arrow direction shown on the top of the filter. Once removed, the filter can be shaken off to remove any collected debris. Filter screen guard 2. Air intake screen As shown below, the air intake screen can be removed and cleaned in warm soapy water.
Troubleshooting Problem Cause Areas to check The unit does not work or turn on. 1. The battery has been inserted incorrectly 2. The battery has not been charged 1. Insert the battery Roller brush is not working 1. Roller brush has debris wrapped around it. 1. Remove the roller brush and thoroughly clean, then reinsert back into the unit. The indicator lamp (red) does not work when charging 1. The power cord is not plugged in. 1.
Discarding the Vacuum Remove the batteries by cutting the connector wires one by one before you discard the appliance. Do not dispose of batteries with your regular household trash. Dispose of them in an environmentally safe manner. Battery Disposal Remove the batteries by cutting the connector wires one by one before you discard the appliance. Do not dispose of batteries with your regular household trash. Dispose of them in an environmentally safe manner.
