75376-07 REV B S I M P L Y A M A Z I N G® USER’S GUIDE XL2090RSM COMMERCIAL HIGH SPEED UPRIGHT VACUUM CLEANER WITH ® CLEANING SYSTEM •IMPORTANT• SAVE THIS BOOKLET! Includes: • Safety Warnings • Warranty • Operating Instructions • Trouble Diagnosis • Accessories
1 2 Upper Handle 3 Connector Assembly Connector Assembly 4 5 6 7 8 12 13 17 18 A B 9 10 11 14 15 16 OLD NEW Intake Opening 19 20 21 22 23 Tube Fan Housing Retainer Spring O-ring Intake Opening 24 25 Connector Deflector 1 Fan Housing
BEFORE OPERATING CLEANER, READ ALL INSTRUCTIONS IN THIS MANUAL CAREFULLY. IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Table of Contents READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER Maintenance and Customer Service, Accessories, Grounding Instructions, Important Safety Instructions . . . . . . . page 2 Warranty, Unit Specifications,Parts List, Assembly, Operating Instructions . . . . . . . . . . . . .
Warranty Bag Cover: XL Filter Knit, heavy duty, reinforced. Convenient pocket in back for storage of cleaning accessories and extra disposable dust bag. MicroSweep®: Cleans bare floors without hoses, adjustments, or attachments. ORECK MANUFACTURING COMPANY: (Oreck gives you the following limited warranty for this product only if it was originally purchased for use, not resale, from Oreck or an Oreck Authorized Retail Dealer.
. WARNING: Do not use your vacuum cleaner on damp or wet surfaces. This will cause damage to the vacuum cleaner and is dangerous to the user. 6. REPLACE THE BELT EVERY 6 MONTHS. 7. Change the disposable filter dust bag at least once a month— even if it is not full! The collected dust in the dust bag can cause odor, attract moisture, and can affect the efficiency of the cleaner. 8. DO NOT run the vacuum cleaner over the cord. The revolving brush could damage the cord. 9.
Troubleshooting Guide IMPORTANT: Unless the brush is worn as indicated above, both bearings must be in the “NEW” position. When rotating, both bearings must be in the “OLD” position. Unmatched settings will cause damage to your machine. WARNING: Unplug cord from electrical outlet before servicing. Using An Oreck Fresh Air® Tab SAVE SERVICE CALLS...CHECK THESE FIRST: • Is the disposable filter dust bag full? fig. 17 Your ORECK XL vacuum cleaner has a special Oreck Fresh Air® tab pocket.
6
75376-07 REV B 05/05 ECN# R-8018 ©2005 Oreck Holdings, LLC. All Rights Reserved. All word marks, logos, registered trademarks and product configurations are owned and used under the authority of Oreck Holdings, LLC.