User Manual

Before you use the Bluetooth headset with mobile phone, pair it with mobile phone.
1. Long press S5 button about 5 seconds. When your headset LED will flash the red and blue alternately,
ceased to press the button. The Headset emits “beep”sound for twice, then the headset had been entered into
the pairing mode.
2. Search the Bluetooth headset on your mobile phone (please study the user manual of your mobile phone);
after the search, your phone should indicate that it has found the “BM-880” on the list.
3. Select BM-880 on the list, pairing with your mobile phone. When the headset is paired with your mobile
phone, the headset emits a “beep” sound, blue light turns into flash slowly at about once per 2.5 seconds.
Attention:
When pairing with your mobile phone，some mobile phone models required to input a pairing code，please
input“0000”(4 zeros).
If the headphone has not paired the device within 3 minutes, the headphone will automatically be turned
off.
If the Bluetooth headset is not in the pairing mode, the headset cannot be searched by your mobile phone or
other Bluetooth device. Please set your headset into pairing mode and search again.
Ⅳ.Power On/Off and Reconnection
1. POWER ON（reconnect to the device）
Long press S5 button about 1 second，the LED turns purple for one second，the headphone emit a“beep”
sound, the LED flashes quickly, about twice a second, the headset will automatically connect to the device; when
the headset is reconnected with your Bluetooth device, the headset emits a“beep”sound, blue light flash slowly at
about once per 2.5 seconds.
Remark：Reconnection can only be connected with the headset which paired with Bluetooth devices
If the headphone is not reconnected to the device within 5 minutes, the headset will automatically be
turned off.
2. POWER OFF
Long press S5 button about 3 seconds, the LED turns purple for one second, the headset emits a“beep”
sound, then power off.
Ⅴ.Making phone calls with your Bluetooth headset
When the Bluetooth headset and your mobile phone has been completed the pairing connection, you can
use the headset to answer a call or enjoy the stereo music over the cell phone.
（1）Dialing, answering and ending a call
1. Dialing a call
1.1 Use your mobile phone to dial as usual, you will hear a notice voice after dialing, then
the call has been connected，the call will automatically be switched to the Bluetooth headset. (Some smart phone
may to switch manually)
1.2 Redial the last number: press S4 button once to dial the last dialed number.
2. Answering and ending a call
*When a call comes in, you will hear a notice voice.
2.1 When a call comes in, press S4 button once for answering the call
2.2 When you are in an active call, press S5 button to transfer the call to the phone; press again S5 to transfer
back the active call from the phone to the headset. (some mobile phones may not support this function）