Operation Manual

EN
14
DISPLAY SETTING MODE
In this mode you can customize various system settings.
1. From the Main Menu, access the SETTINGS Mode.
Press UP / DOWN to
select DISPLAY
Setting Mode.
DISPLAY MODE Select STILL or SLIDE SHOW
You can select to display just one
photo as Wallpaper or all 6
downloaded photos in sequence
NOTE If no picture has been
downloaded, only STILL option can
be chosen
SLIDE SHOW Select the slide show display speed
FREQ – 5 SEC, 15 SEC or 30 SEC
EXIT Return to previous page
NOTE The WALLPAPER option must be set to ON to
access the other settings on this screen. Also, the SLIDE
SHOW option must be selected as the display mode to
access the SLIDE SHOW FREQ setting.
WALLPAPER Select ON / OFF. When enabled, the
selected photo will be shown on the
display when SNOOZE / PHOTO is
pressed in standby
SELECT Select 1 of the 6 pictures available
WALLPAPER
NOTE If you have not downloaded
any new pictures you can only select
the default picture “Smart Living”.
Once you have downloaded your own
pictures you can only select 1 of
these and not the default picture
2. Choose the settings that you want to adjust and edit
as shown in the Changing Settings section.
AWS899_EN_R13 3/7/05, 5:36 PM14