Operation Manual
EN
22
LOW BATTERY DETECTION
When battery levels get too low, the
icon will appear.
Also, when no adaptor is connected, the
icon will be
displayed.
NOTE The main unit will display the channel battery
status when the corresponding channel is selected.
SAFETY AND CARE
Wash the unit with a slightly damp cloth and mild
detergent. Avoid dropping the unit or placing it in a high-
traffic location.
WARNINGS
This product is designed to give you years of service if
handled properly. Observe the following guidelines:
• Never immerse the unit in water. This can cause
electrical shock and damage the unit.
• Do not subject the main unit to extreme force, shock,
or fluctuations in temperature or humidity.
• Do not tamper with the internal components.
• Do not mix new and old batteries or batteries of
different types.
• Do not use rechargeable batteries with this product.
• Remove the batteries if storing this product for a long
period of time.
• Do not scratch the LCD display.
DEFAULT SETTINGS
1/1/2005
Time 00:00:00 (24 hour format)
or 12:00:00 am (12 hour
format)
Clock display Time-second display mode
Daily / weekday alarm Alarm disabled
Sleep Mode Sleep start at 12:00 a.m.
and sleep end at 6:00 a.m.
& function disabled
Silence Mode Off
Weather
Partly cloudy
Date
Wallpaper function Off
Pressure display Current pressure
Altitude 0m
Thermo-hygro display Current indoor
Indoor temperature trend Steady
Indoor humidity trend Steady
Sensor search Enabled
Receive RF clock Enabled
Press RESET to restore all settings to factory defaults.
AWS899_EN_R13 3/7/05, 5:36 PM22










