Operation Manual

ManualsBrandsOregon Scientific ManualsAir ConditioningBAR112

DIGITAL WEATHER FORECASTER

WITH REMOTE THERMO-SENSOR AND

RADIO CONTROLLED CLOCK

MODEL: BAR112

USER’S MANUAL

INTRODUCTION

Congratulations on your purchase of the Weather forecaster with

cable free sensor and radio-controlled calendar clock (BAR112).

A multifunction device, this unit has a large four-line liquid

crystal display (LCD) for displaying weather forecast information,

in/outdoor temperatures, a radio frequency (RF) controlled calendar

clock, time zone adjusted time, and dual daily alarms. Also, it can

display temperature readings from up to three wireless remote

thermo-sensors.

Other features include a day-of-the-week display in four abbreviated

languages, a four-step crescendo alarm, and interchangeable clock

display modes.

MAIN FEATURES: MAIN UNIT

Summary of content (12 pages)

PAGE 1
GB DIGITAL WEATHER FORECASTER WITH REMOTE THERMO-SENSOR AND RADIO CONTROLLED CLOCK MAIN FEATURES: MAIN UNIT MODEL: BAR112 USER’S MANUAL INTRODUCTION Congratulations on your purchase of the Weather forecaster with cable free sensor and radio-controlled calendar clock (BAR112).
PAGE 2
GB Sets the remote sensor channel. A . FRONT DISPLAY A four line easy-to-read LCD each with specific purposes that relate to weather forecasting, temperature, or clock / calendar / alarm functions. B2. [MEM] BUTTON Displays minimum and maximum temperature readings, and erases memory data A1 . WEATHER FORECAST WINDOW - Graphically illustrates a weather forecast ] BUTTON B3. ALARM [ Displays the alarm time, or changes the alarm set time A2.
PAGE 3
GB A. LED INDICATOR Flashes when the remote sensor transmits a reading MAIN FEATURES: REMOTE SENSOR UNIT B. CHANNEL SLIDE SWITCH Designates the remote sensor Channel The remote sensor is a wireless independent component. Its function is to monitor temperatures at a location other than the location of the main unit. C. RESET BUTTON Returns all settings to default values D. BATTERY COMPARTMENT Accommodates two (2) UM-4 “AAA” size batteries E. BATTERY DOOR F.
PAGE 4
GB BATTERY INSTALLATION: BATTERY INSTALLATION: MAIN UNIT REMOTE UNIT 1. Gently lift the tab on the battery compartment door. The remote unit uses two UM-4 or “AAA” size alkaline batteries. 2. Insert four UM-3 or “AA” size alkaline batteries. Installation: 3. Replace the battery compartment door. 1. Remove the screws on the battery compartment. Note: For both the remote sensor and the main unit, replace batteries when 2.
PAGE 5
GB MAXIMUM AND MINIMUM TEMPERATURES TRANSMISSION COLLISION Signals from other household devices, such as door bells, home security systems and entry controls, may interfere with those of this product and cause temporarily reception failure. This is normal and does not affect the general performance of the product. The transmission and reception of temperature readings will resume once the interference recedes. The maximum and minimum recorded temperatures will be automatically stored in memory.
PAGE 6
GB MODE 4. Hour-Minute-Day of the Week (of second time zone) NOTE: 1. The accuracy of a general pressure-based weather forecast is about 70% to 75%. Day-Month (of alternate time zone) 2. The weather forecasts from this unit are predictions that cover the next 12 to 24 hours. It may not necessarily reflect the current situation. Each press on the MODE button will toggle the display in the above order. 3. The “Sunny” icon, as applies to nighttime, implies clear weather.
PAGE 7
GB HOW TO SET THE CLOCK MANUALLY - Strong To set the clock manually, hold MODE/SET for three seconds. The hour digits will blink. - Weak Press or select the hour. Keep pressing the button to increase or decrease the value rapidly. Press MODE/SET to confirm. The minute digits will blink. - No signal Repeat the same procedure to set the minutes, hour, current date, month, display language, day-of-week and offset for the alternate time zone.
PAGE 8
GB To set an alarm: 1. Press [ ] once to select ALARM 1 or again to select ALARM 2 the last selected time of the alarm will be displayed. If you have never set the alarm before, the time will be displayed as 0:00. 2.Press [ ] for three seconds. The hour digits will blink. 3.Enter the hour using 4.Press [ and NOTE ON OUTDOOR-REMOTE TEMPERATURE Once batteries are in place in the remote unit, it will start transmitting samplings at 30-second intervals.
PAGE 9
GB HOW TO WALL-MOUNT OR USE THE TABLE STAND MAINTENANCE When handled properly, this unit is engineered to give you years of satisfactory service. Here are a few product care instructions: The unit can be wall-mounted using its recessed screw holes or place on a flat surface by attaching the table stand. 1. Do not immerse the unit in water. If the unit comes in contact with water, dry it immediately with a soft lint-free cloth. Main Unit: Wall-mount Table Stand 2.
PAGE 10
GB Dimension SPECIFICATIONS Main unit : 161 x 87 x 28 mm (L x Wx D) Remote sensing unit : 92 x 60 x 21mm (L x Wx D) Temperature Measurement Main unit Indoor Temperature measurement Proposed operating range Temperature resolution Remote unit Proposed operating range : -5.0°C to +50.0°C (23.0°F to 122.0°F) : 0.1°C (0.2°F) : 0.1°C (0.
PAGE 11
GB ! Reorient or relocate the receiving antenna. ! Increase the separation between the equipment and receiver. ! Connect the equipment into an outlet on a circuit different from that to which the receiver is needed. ! Consult the dealer of an experienced radio/TV technician for help. CAUTION — The content of this manual is subject to change without further notice. — Due to printing limitation, the displays shown in this manual may differ from the actual display.
PAGE 12
GB MODEL: BAR112 DIGITAL WEATHER FORECASTER WITH REMOTE THERMO - SENSOR AND RADIO CONTROLLED CLOCK Instruction Manual **** Mode D'emploi **** Bedienungsanleitung **** Manuale di Istruzioni **** Instrucciones de Funcionamiento 12