Operation Manual

ManualsBrandsOregon Scientific ManualsAir ConditioningBAR112HG

DIGITAL WEATHER FORECASTER

WITH REMOTE THERMO-HYGRO

SENSOR AND RADIO CONTROLLED

CLOCK

MODEL NO.: BAR112HG

USER’S MANUAL

INTRODUCTION

Congratulations on your purchase of the Weather forecaster with

cable free sensor and radio-controlled calendar clock (BAR112HG).

A multifunction device, this unit has a large four-line liquid crystal

display (LCD) for displaying weather forecast information, in/

outdoor temperatures, relative humidity, a radio frequency (RF)

controlled calendar clock, time zone adjusted time, and dual daily

alarms. Also, the main unit can support up to three remote sensors.

Other features include a day-of-the-week display in four abbreviated

languages, a four-step crescendo alarm, and interchangeable clock

display modes.

MAIN FEATURES: MAIN UNIT

Summary of content (15 pages)

PAGE 1
GB DIGITAL WEATHER FORECASTER WITH REMOTE THERMO-HYGRO SENSOR AND RADIO CONTROLLED CLOCK MAIN FEATURES: MAIN UNIT MODEL NO.: BAR112HG USER’S MANUAL INTRODUCTION Congratulations on your purchase of the Weather forecaster with cable free sensor and radio-controlled calendar clock (BAR112HG).
PAGE 2
GB A . FRONT DISPLAY A four line easy-to-read LCD each with specific purposes that relate to weather forecasting, temperature, relative humidity, or clock / calendar / alarm functions. J. A1. WEATHER FORECAST WINDOW Graphically illustrates a weather forecast K. [AL ON/OFF] BUTTON (TEMP/% RH ALARM ON/OFF) Enables / disables HI/LO temp alarm and HI/LO % RH alarm B. [ L.
PAGE 3
GB FEATURES: REMOTE THERMO-HYGRO SENSOR A. TWO-LINE LCD Displays the current temperature and humidity monitored by the remote unit B. LED INDICATOR Flashes when the remote unit transmits a reading C. °C/°F SLIDE SWITCH Selects between Centigrade (°C) and Fahrenheit (°F) D. CHANNEL SLIDE SWITCH Designates the remote unit Channel 1, Channel 2 or Channel 3 E. RESET Returns all settings to default values F. BATTERY COMPARTMENT Accommodates two AAA-size batteries G. BATTERY DOOR H.
PAGE 4
GB easier synchronization between the transmission and reception of signals. BATTERY AND CHANNEL INSTALLATION: REMOTE UNIT 4. Position the remote unit and main unit within effective transmission range, which, in usual circumstances, is 20 to 30 meters. The remote thermo-hygro sensor unit uses two (2) UM-4 or “AAA” size alkaline batteries. Note that the effective range is vastly affected by the building materials and where the main and remote units are positioned. Try various set-ups for best result.
PAGE 5
GB Remote unit Wall-mount LOW BATTERY WARNING Table Stand When it is time to replace batteries, the respective low-battery indicator will show up when the respective channel is selected. The battery level of the main unit will be shown on the indoor temperature when it is running low. HOW TO USE THE TABLE STAND OR WALL MOUNTING The main unit has a removable table stand, which when connected, can support the unit on a flat surface.
PAGE 6
GB If no signals are received, blanks “---” will be displayed and the kinetic wave icon will not show. To display temperature / humidity readings from a remote sensor: To force a signal search: • Press [CHANNEL] until the appropriate remote sensor channel is displayed in the box under the kinetic-wave. • Press and hold [CHANNEL] & [MEM] for 2-seconds to enforce a 3-minute search.
PAGE 7
GB THE COMFORT-LEVEL ICONS Arrow indicator The comfort level is based on the recorded relative humidity. An indicator will be displayed or show if the level is comfortable, wet or dry. Pressure Trend Dry Steady Falling Note: If the temperature goes above or below the temperature measuring range of the main unit or the remote unit ( stated in specification), the display will show “HHH” or “LLL”.
PAGE 8
GB To display the maximum and minimum display memory: To set a high or low temperature or humidity alarm: 1. Select the channel to be checked. 1. Press [HI/LO], channel-1 will be displayed. 2. Press [MEM] once to display the maximum temperature humidity and again the minimum temperature humidity. The respective indicators, MAX or MIN will be displayed. 2. Press [ To clear the memory: • Press and hold [MEM] for 2-seconds.
PAGE 9
GB been surpassed. TRANSMISSION COLLISION To disable an alarm: 1. Enter the setting mode by pressing [HI/LO]. 2. Then, press [AL ON/OFF]. Signals from other household devices, such as door bells, home security systems and entry controls, may interfere with those of this product and cause temporarily reception failure. This is normal and does not affect the general performance of the product. The transmission and reception of temperature readings will resume once the interference recedes.
PAGE 10
GB CALENDAR CLOCK DISPLAY MODES ABOUT RADIO RECEPTION The BAR112HG supports four time display modes in the sequence of: The BAR112HG is designed to automatically synchronize its calendar clock once it is brought within range of the Frankfurt DCF77 radio signal. When the BAR112HG is within range, its radio-control mechanism will override all manual settings. When the unit is receiving radio signal, the RADIO RECEPTION signal will start to blink.
PAGE 11
GB return to the mode last chosen. If you wish to disable the auto-reception feature, press the [ ] button for three seconds. The radio reception signal [ ] will disappear. The unit will not respond to radio signals. HOW TO SET AND ARM THE ALARMS ] button for three seconds. To enable the feature again, press the [ The BAR112HG has two alarms, ALARM 1 and ALARM 2. They can be invoked together or independently. The radio reception signal [ ] will start blinking to initiate reception automatically.
PAGE 12
GB HOW TO STOP AN ALARM MAINTENANCE To stop an alarm, you can use either press [ ] button or [AL ON/ OFF] button. Pressing [ ] or [AL ON/OFF] will stop the alarm, which is still armed and will activate at the set time the following day. When handled properly, this unit is engineered to give you years of satisfactory service. Here are a few product care instructions: If [AL ON/OFF] button is pressed again, the alarm will be stopped and deactivated all together. 2.
PAGE 13
GB Temperature resolution : 0.1°C (0.2°F) Relative Humidity Operating : 25% RH to 90% RH range Remote thermo-hygro unit Proposed operating range Temperature resolution EC-DECLARATION OF CONFORMITY This product contains the approved transmitter module TX 01 and complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directives, if used for its intended use and that the following standard(s) has/have been applied: : -20.0°C to +60.0°C (-4.0°F to 140.
PAGE 14
GB CAUTION — The content of this manual is subject to change without further notice. — Due to printing limitation, the displays shown in this manual may differ from the actual display. — The contents of this manual may not be reproduced without the permission of the manufacturer.
PAGE 15
GB MODEL: BAR112HG DIGITAL WEATHER FORECASTER WITH REMOTE THERMO-HYGRO SENSOR AND RADIO CONTROLLED CLOCK Instruction Manual **** Mode D'emploi **** Bedienungsanleitung **** Manuale di Istruzioni **** Instrucciones de Funcionamiento 15