EN Weather Day & Night Model: BAR339DP / BAR339DPA / BAR339DPU / BAA339DPH USER MANUAL 1 BAR339DP_M_COVER.
EN © 2008 Oregon Scientific. All rights reserved. 086L005696-011 2 BAR339DP_M_COVER.
Main Unit ................................................................ 8 EN Weather Day & Night Model: BAR339DP / BAR339DPA / BAR339DPU / BAA339DPH Remote RF Clock Thermo Sensor ......................... 8 Precautions .............................................................. 8 About Oregon Scientific ......................................... 9 USER MANUAL EU-Declaration of Conformity ................................ 9 FCC Statement .........................................................
EN display; activate / deactivate auto-scan 11. Main unit batteries low / no battery 12. Projector: Project time / outdoor temperature and weather forecast OVERVIEW FRONT VIEW 13. 14. 15. 16. 17. 18. 19. Indicate indoor / outdoor sensor reception status Outdoor Temperature (Current / Max / Min) Clock Time Zone Offset Calendar with weekday / seconds ALARM: View alarm status / set alarm MEM: Toggle between current / maximum / minimum temperature display; clear records 1.
EN BACK VIEW 9. Battery compartment REMOTE SENSOR FRONT VIEW BACK VIEW 5 1 2 6 3 4 1. FOCUS Wheel: Adjust projection focus 2. AC/DC Adaptor socket 3. / : Decrease / increase value of the setting; enable / disable clock reception 4. SEARCH: Initiate sensor search 5. °C / °F: Select temperature unit 6. LIGHT ON/OFF: Turn backlight continuously On (adaptor installed) / only when SNOOZE key is pressed 7. RESET: Reset unit to default settings 8.
EN • Plug AC/DC adaptor into socket. Make sure the adapter is not obstructed and is easily accessible to the unit. The sensor reception icon shows the status: ICONS To completely disconnect from power, the adapter should be disconnected from the main unit. Main unit is searching for sensor(s) NOTE The main unit and adapter should not be exposed to wet conditions. No objects filled with liquid, such as vases, should be placed on the main unit and adapter.
EN NOTE Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing. CLOCK CLOCK RECEPTION This product is designed to synchronize its clock automatically with a clock signal received from provided remote sensor. To enable / disable signal reception: Press and hold to enable or to disable signal reception. For best results: • Place the sensor within 30 m (100 ft) of the main unit. • Place the sensor out of direct sunlight and moisture.
EN 3. Press ALARM to confirm. indicates alarm is on. MANUALLY SET CLOCK To set the clock manually, disable the clock signal reception first. 1. Press and hold CLOCK. 2. Press / to change the settings. 3. Press CLOCK to confirm. To activate / deactivate alarm: 1. Press ALARM to display alarm time. 2. Press ALARM again to turn alarm on / off. The settings order is: time zone, 12/24 hr format, hour, minute, year, calendar mode (month – day / day – month), month, day and language.
To project weather forecast and time: • Press SNOOZE when PROJECTION switch is in OFF mode To toggle between indoor / outdoor temperature display: Press TEMP. OR • To toggle temperature unit: Press °C / °F. Slide PROJECTION switch to CLOCK mode for continuous display. To auto-scan between sensors: Press and hold TEMP. To project weather forecast and activate toggling display of time / outdoor temperature: • Slide PROJECTION switch to AUTO mode. To deactivate auto-scan function: Press TEMP.
EN SPECIFICATIONS PRECAUTIONS MAIN UNIT • TYPE DESCRIPTION • LxWxH 142 x 42 x 158 mm (5.59 x 1.65 x 6.22 in) • Weight 270g (9.52 oz) without battery Power 5V AC adaptor 2 x CR2032 batteries (for backup) • • • • REMOTE RF CLOCK THERMO SENSOR • TYPE DESCRIPTION LxWxH 64 x 25 x 98 mm (2.52 x 0.98 x 3.86 in) Weight 80 g (2.8 oz) without battery Temperature range -20°C to 60°C (-4°F to 140°F) Resolution 0.1°C (0.
EN NOTE The technical specifications for this product and the contents of the user manual are subject to change without notice. COUNTRIES RTTE APPROVAL COMPLIED All EU countries, Switzerland CH and Norway N NOTE Features and accessories will not be available in all countries. For more information, please contact your local retailer. FCC STATEMENT ABOUT OREGON SCIENTIFIC This device complies with Part 15 of the FCC Rules.
EN Manufacturer: Address: IDT Technology Limited Block C, 9/F, Kaiser Estate, Phase 1, 41 Man Yue St., Hung Hom, Kowloon, Hong Kong is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation.