TREVISO Sleek Weather Station Model: BAR988HGA / BAR986HGA USER MANUAL BAR988HGA English Cover R5 1 9/18/04, 2:55 AM
Alarms ..................................................................... 15 Set Daily Alarm .................................................... 15 USER MANUAL Set Pre-Alarm ...................................................... 16 Activate Alarm ...................................................... 16 CONTENTS Snooze ................................................................ 16 Introduction .............................................................. 3 Barometer .........................
EN Backlight ................................................................. 22 Reset System ......................................................... 22 Safety and Care ...................................................... 22 Warnings ................................................................. 22 Troubleshooting ..................................................... 23 Specifications ......................................................... 23 About Oregon Scientific ..............................
Thank you for selecting the Oregon Scientific TM BAR988HGA / BAR986HGA TREVISO Sleek Weather Station. This powerful device bundles time keeping, weather monitoring, indoor and outdoor temperature and humidity readings, barometric trends and altitude adjustment, into a single tool you can use from the convenience of your home.
EN PRODUCT OVERVIEW FRONT VIEW 1. LCD display 2. MODE: Change settings / display 1 2 3. MEMORY: View current, maximum and minimum temperature / humidity / UV readings 7 4. HISTORY: View historical barometer and UV readings 3 5. ALARM / 8 : View alarm status; set alarm 6. SNOOZE / LIGHT: Activate 8-minute snooze or backlight 4 7. SELECT: Switch Areas 9 8. CHANNEL: Switch remote sensor display 9. UP: Increase setting / activate atomic clock 5 10 10.
EN BACK VIEW 1. Ventilation holes 2. Battery compartment (bottom) 3. AC adaptor socket 4. °C / °F switch (in battery compartment) 1 5. RESET button (in battery compartment) 6.
EN LCD DISPLAY 1. Weather Forecast Area: Animated weather forecast 2. Temperature / Humidity / Comfort Zone Area: Readings and trend lines; comfort zone; sensor channel number 3. UVI / Barometer Area: UV level and barometric pressure bar chart; UV Index and barometric readings 1 4.
EN Temperature / Humidity / Comfort Zone Area Weather Forecast Area 6 7 1 2 1 2 3 3 8 9 4 5 10 11 1. Selected Area icon 2. Temperature trend 3. Channel number (1-5) / reception status 1. Low battery icon for main unit 4. Low battery icon for remote sensor 2. AC adaptor icon - displays when unplugged 5. Humidity trend 3. Weather display 6. MAX / MIN temperature 7. Temperature - °C / °F 8. Heat Index 9. MAX / MIN humidity 10. Humidity 11.
EN Clock / Alarm / Calendar Area UVI / Barometer Area 1 2 1 2 3 6 8 4 5 7 9 10 11 1. Pre-Alarm is set 12 3. Channel with atomic clock reception is locked 3 4 5 6 2. Pre-Alarm display / Pre-Alarm setting 4. Atomic clock reception icon 7 5. Daily Alarm is set 1. Barometric pressure is showing 6. Offset time-zone 2. UV is showing 7. Time / date / calendar 3. Low battery icon for UV sensor 4. UVI value is showing 5. UV exposure time countdown has started 6. UV index level 7.
EN REMOTE SENSOR (RTGR328NA) 5 1 2 1 3 6 2 7 4 8 1. Signal reception 2. US time zone 3 3. Channel number 4. Low battery icon 5. Time 1. LCD display 6. Temp (°C or °F) 2. LED status indicator 7. Humidity % 3. Ventilation duct 8.
EN GETTING STARTED BATTERIES Batteries are supplied with this product: 1 2 3 4 5 • Main unit 4 x UM-4 (AAA) 1.5V • Remote unit 2 x UM-3 (AA) 1.5V Insert batteries before first use, matching the polarity as shown in the battery compartment. For best results, install batteries in the remote sensor before the main unit. Press RESET after each battery change. 6 7 To install the main unit batteries: 8 1. Wall mount 2. CHANNEL switch (1-5) 3. RESET 4. °C / °F 5.
UNIT Main Remote UV Sensor CHANGE SETTINGS 1. Press SELECT to switch between Areas. indicates the selected Area. LOCATION Weather Forecast Area Temperature / Humidity Area UVI / Barometric Pressure Area NOTE The UV Sensor is an optional item. AC ADAPTOR (MAIN UNIT) The batteries serve as a back-up power supply. For continuous use, please install the AC adaptor at the base of the unit: 2. Most Areas have alternate display options (for example, Clock / Alarm or Barometer / UVI).
EN The RTGR328NA Sensor collects and transmits temperature and humidity information, along with time and date information. Time and date information is obtained by synchronizing with radio broadcasted atomic clock information from the National Institute of Time located in Boulder Colorado. For more information on the Atomic Clock, please visit www.nist.gov To fold out the stand: 1 2 SET UP THERMO / HYGRO SENSOR (RTGR328N) 1. Open the battery compartment with a small Phillips screwdriver. 2.
SEARCH FOR SENSOR To search for a Thermo / Hygro sensor, press SELECT to navigate to the Temperature / Humidity Area. will show next to the Area. Then, simultaneously press and hold MEMORY and CHANNEL for 2 seconds. You may need to experiment with various locations to get the best results. SENSOR DATA TRANSMISSION To search for the UV sensor, press SELECT to navigate to the UVI / Barometer Area. will show next to the Area. Then, press and hold MEMORY and CHANNEL for 2 seconds.
EN ATOMIC CLOCK ICON The RTGR368NA remote sensor collects time and temperature information and transmits this back to the main unit. The current time and date is received by radio signal from the Atomic Clock broadcast located in Boulder, Colorado. For more information on the Atomic Clock, please visit www.nist.gov The unit has lost contact with the remote sensor and the time is not synchronized. The unit cannot reach the remote sensor.
NOTE The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish. The language you select determines the weekday display. SWITCH CLOCK DISPLAY Press SELECT to navigate to the Clock Area. show next to the Area. SET CLOCK The BAR988HGA / BAR986HGA and the RTGR368NA should automatically set and update the time, as necessary.
EN 2. Press ALARM / at the top.) to view the alarm. (AL will show 3. Press and hold ALARM / 5. Press ALARM / for 2 seconds. shows when the Pre-Alarm is set. 4. Select the hour and minute. Press UP or DOWN to change settings. 5. Press ALARM / NOTE The Daily Alarm will NOT function until the next day if the Pre-Alarm has been triggered. Also, if you deactivate the Daily Alarm, the Pre-Alarm is automatically deactivated. to confirm. 6. The Daily Alarm icon is set. to confirm.
EN VIEW BAROMETER AREA Press SELECT to navigate to the Barometer Area. If is NOT shown, press MODE. Barometric data is shown in 2 areas at the bottom of the display. The upper area shows a 24-hour bar chart. The lower area shows current and historical readings. BAR CHART DISPLAY The bar chart visually shows atmospheric changes from the current hour (0) to 24 hours prior (-24). SELECT MEASUREMENT UNIT Slide the mb / inHg switch (in the clock battery compartment), to change the display unit.
EN 3. Press UP or DOWN to set the altitude in 33-foot increments (-328 ft to 8202 ft). ICON DESCRIPTION Cloudy 4. Press HISTORY to confirm. WEATHER FORECAST Rainy This product forecasts the next 12 to 24 hours of weather within a 19-31 mile (30-50 km) radius. The forecast is based on barometric pressure trend readings. Snowy NOTE The night time icon displays from 6 PM to 6 AM. When the Channel 1 Sensor records a temperature of 35.6°F (2°C) or lower, the RAINY icon becomes SNOWY.
3. Press and hold MODE for 2 seconds to enter the Skin Type Setting Mode of the selected user. 4. Press UP or DOWN to choose 1 of the 4 skin type settings. Then press MODE to confirm and enter the SPF Set Up Mode. NOTE Refer to the UVR138A User Manual for more information and see below to learn about the new additional UV features. 5. Press UP or DOWN to increase or decrease the SPF value. Then press MODE to confirm and enter the UV Exposure Time Countdown Setting Mode.
EN NOTE The UV sensor must be activated before you try and set the additional features. Please refer to the UVR138A User Manual for more information. SELECT MEASUREMENT UNIT Slide the °C / °F switch (inside the clock battery compartment), to the setting you want. SELECT SENSOR CHANNEL TEMPERATURE AND HUMIDITY Press CHANNEL to switch between sensors 1-5.
EN TEMPERATURE AND HUMIDITY TREND HEAT INDEX The trend lines are shown next to the temperature and humidity readings. The Heat Index advises 4 levels of warning if the temperature is high. TREND RISING STEADY FALLING TEMPERATURE HUMIDITY COMFORT ZONE DANGER CATEGORY TEMPERATURE °F °C Extreme Danger >130 >54.5 Danger 105-130 40.5-54.4 Extreme Caution 90-105 32.2-40.5 Caution 80-90 26.6-32.
EN BACKLIGHT WARNINGS Press SNOOZE / LIGHT to illuminate the backlight for 8 seconds. This product is designed to give you years of service if handled properly. Oregon Scientific will not be responsible for any deviations in the usage of the device from those specified in the user instructions or any unapproved alterations or repairs of the product. Observe the following guidelines: RESET SYSTEM The RESET button is located at the bottom of the unit.
EN TROUBLESHOOTING SPECIFICATIONS PROBLEM SYMPTOM REMEDY Main Unit Dimensions Barometer Strange readings Set altitude / unit (→ 17) LxWxH 4.72 x 3.39 x 7.40 inches (120 x 86 x 188 mm) Calendar Strange date / month Change language (→ 15) Weight 0.83 lbs (376 grams) without battery Clock Cannot adjust clock Disable atomic clock (→ 14) Cannot auto-synch 1. Adjust batteries (→ 10) Remote Unit Dimensions 2.
EN Comfort 40% to 70% Memory Min / max Barometer Calendar DD / MM or MM / DD; Day of the week in 1 of 5 languages (E, G, F, I, S) Alarm Daily & Pre-Alarm; 2-minute crescendo Snooze 8-minute snooze Unit mb / hPa or inHg Resolution 1 mb (0.03 inHg) Altitude -328 to 8202 feet (-100 to 2500 meters) Power Display Sunny (day / night), partly cloudy (day / night), cloudy, rainy, snowy Main Unit Power adapter 6V AC adapter Batteries 4 x UM-4 (AAA) 1.
FCC STATEMENT Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products such as digital cameras; MP3 players; children's electronic learning products and games; projection clocks; health and fitness gear; weather stations; and digital and conference phones. The website also includes contact information for our customer care department in case you need to reach us, as well as frequently asked questions and customer downloads.
EN • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. Product No.: Product Name: TREVISO Sleek Weather Station • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Manufacturer: IDT Technology Limited • Consult the dealer or an experienced radio / TV technician for help.
© 2004 Oregon Scientific. All rights reserved.