Operation Manual

ManualsBrandsOregon Scientific ManualsAMBHM612

INTRODUCTION

Congratulations on your purchasing the BHM-612 Radio Controlled Alarm

Clock.

SMART-LOOKING AND EASY-TO-OPERATE TIMEPIECE, THE BHM-612 IS DESIGNED

AUTOMATICALLY SYNCHRONIZE ITS CURRENT TIME AND DATE WHEN BROUGHT

WITHIN

AN APPROXIMATE 1500KM RADIUS OF THE RADIO SIGNAL GENERATED FROM

DCF77 FRANKFURT, GERMANY (CONTINENTAL CENTRAL EUROPE VERSION) OR

MSF RUGBY, ENGLAND (UK VERSION).

The BHM-612 is also equipped with a daily alarm clock plus date and

multilingual weekday display.

FEATURES & KEY CONFIGURATION

RADIO CONTROLLED ALARM

CLOCK

MODEL : BHM-612

USER’S MANUAL

Summary of content (7 pages)

PAGE 1
GB RADIO CONTROLLED ALARM CLOCK MODEL : BHM-612 USER’S MANUAL INTRODUCTION Congratulations on your purchasing the BHM-612 Radio Controlled Alarm Clock. A SMART-LOOKING AND EASY-TO-OPERATE TIMEPIECE, THE BHM-612 IS DESIGNED TO AUTOMATICALLY SYNCHRONIZE ITS CURRENT TIME AND DATE WHEN BROUGHT WITHIN AN APPROXIMATE 1500KM RADIUS OF THE RADIO SIGNAL GENERATED FROM DCF77 FRANKFURT, GERMANY (CONTINENTAL CENTRAL EUROPE VERSION) OR MSF RUGBY, ENGLAND (UK VERSION).
PAGE 2
GB A RF SIGNAL INDICATOR - Indicates the signal-receiving status of the unit B MAIN WINDOW - Displays the current time with seconds or day-of-the week C SECONDARY WINDOW - Displays the alarm time and its status or date D [ MODE/SET ] button - Changes between seconds and weekday display (Main window) or between calendar and alarm clock display (secondary window) - Holds to activate the clock setting routine E [ UP ] button - Increases the value of a setting by one unit F [ DOWN ] button - Decreases the value
PAGE 3
GB DISPLAY MODES In normal display, the current time, including seconds, will be displayed in the main window and the date will be displayed in the secondary window. To display the weekday in the main window, press [ MODE / SET ] once. Press the button again to display seconds. To display the alarm time in the secondary window, press [ ALARM ] once. Press [ MODE / SET ] to display the date.
PAGE 4
GB HOW TO SET THE CALENDAR CLOCK MANUALLY When the current time is displayed: • Press [ MODE / SET ] for two seconds. • Enter the month using [ UP / DOWN ]. • Press [ MODE / SET ]. • Enter the day of the month using [ UP / DOWN ]. • Press [ MODE / SET ]. • Enter the display language for the weekday using [ UP/DOWN ] . You can choose among E (English), D (German), F (French), I (Italian) and S (Spanish). • Press [ MODE / SET ]. • Follow the same pattern to enter weekday, hours and minutes.
PAGE 5
GB STAND CONNECTOR Wall-Mounting: Wall mount bracket Connector: Use wall-mount connector to align with other wall-mount bracket if neccessary.
PAGE 6
GB MAINTENANCE When handled properly, this unit is engineered to give you years of satisfactory service. Here are a few product care instructions: 1. Do not immerse the unit in water. If the unit comes in contact with water, dry it immediately with a soft lint-free cloth. 2. Do not clean the unit with abrasive or corrosive materials. Abrasive cleaning agents may scratch the plastic parts and corrode the electronic circuit. 3.
PAGE 7
GB R&TTE Compliance Note This device complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directive, if used for its intended use and that the following standard(s) has been applied: Electromagnetic compatibility (Article 3.1.b of the R&TTE Directive) Applied standards ETS 300 683 : 1997 Efficient use of the radio frequency spectrum (Article 3.