Operation Manual

ManualsBrandsOregon Scientific ManualsDigital Camerads 6618 os

English

.........................................................................................................................

English

32 33

34 35

No power. • The battery is exhausted. • Recharge the battery.

The battery runs out quickly. • You are using the camera in • Put the camera in your pocket or

extremely cold condition. another warm place to heat it.

No photograph is taken when • The Auto Power Off function has • Switch the camera on.

the shutter button is pressed. switched the camera off.

• The memory is fully recorded. • Download the images to the PC, and

delete some unwanted images.

The image is blurred. • The camera or subject was moving • Hold the camera firmly.

when the shot was taken.

• You are too close to the subject • Take the shot from a distance within

(outside the photography range) the photography range (approx. 60 cm

whenyou take the shot. to infinity).

• The pop-up lens is skewed. • Take care to pop the lens up correctly

so that it is not skewed.

Nothing happens when you • Camera malfunctions. • Switch the camera off and then on

use the camera buttons and again.

switch. • The battery is exhausted. • Recharge the battery.

TROUBLESHOOTING

Problem Cause Remedy

The PC does not recognize • Connect the camera to the PC • Connect the camera to the PC with

the camera. with the USB cable before installing the USB cable and select [My

the software. Computer] / [Control Panel]/

[System] / [Device Manager]. In the

[Device Manager] window, delete

[Compose USB device] or [Unknown

device] in [Other devices]. Then

disconnect the camera and install the

software before reconnecting the

camera to the PC.

• Connect the camera directly to the

PC using the USB cable, not via a

USB hub.

• Disconnect the other USB devices

connected to the PC.

Everything on the LCD • Camera firmware defect. • If the “Camera firmware is out of sync.

flashes and “7” or “8” is Update recommended. Update

displayed. firmware?” message appears when

you connect the camera to your PC

with the USB cable, click the [Yes]

button and update your firmware.

Problem Cause Remedy

• Actual number of pixels

0.31 million pixels

• CCD image sensor

CMOS image sensor with Autobrite

technology

• Storage media

8MB internal flash memory

• File format

JPEG (Converted when images are downloaded using

the enclosed software.)

• Image file size

VGA: 640 x 480 pixels

QVGA: 320 x 240 pixels

• Sensitivity

Equivalent to ISO100

• Lens

F=3.8, f=6.87 mm

(Equivalent 47 mm on a 35 mm camera)

• Finder

Optical

• White balance

Autobrite

• Focal range

60cm - ∞

Specifications

• Shutter speed

Automatic (1/30 - 1/15000 sec.)

• Focus

Fixed

• Digital output

USB (mini-B)

• Number of available shots

VGA (640 x 480 pixels): 26 shots

QVGA (320 x 240 pixels): 101 shots

• Power supply

Lithium-ion battery (rechargeable, non-removal)

• Camera dimensions

85.6 x 54.0 x 6.0 mm (W/H/D)

(not including accessories and attachments)

• Camera mass(weight)

Approx. 1.2 oz. (35 g)

(including battery, not including accessories)

• Condition for use

Temperature: +32F to +104F (0°C to +40°C)

Humidity: 80% or less (no condensation)

Specifications are typical; individual units might vary.

Specifications are subject to change and improvement

without notice.

■

For Windows

• Compatible PCs: IBM PC/AT or compatible (models with USB support as standard)

• Operating system: Windows 98 (including the second edition), Windows Millenium Edition (Windows Me),

Windows 2000 Professional, Windows XP Professional, Windows XP Home Edition

• CPU: 200 MHz Pentium or better

• RAM: 32MB minimum

• Hard disk space: 200MB minimum

• Others: A CD-ROM for driver and software installation

■

For Macintosh

• Compatible Macs: Power Macintosh G3 200 MHz minimum (models with USB support as standard)

• Operating system: Mac OS 8.6-9.0, 9.1, 9.2

• RAM: 32MB minimum

• Hard disk space: 200MB minimum

• Others: A CD-ROM for driver and software installation

System Requirements