Operation Manual
9
EN
CONNECTING THE MAIN UNIT
Connect one end of the main unit's cable into the AC IN
jack and plug the other end of the cable into a standard
2-wire or 3-wire power outlet or power strip.
INSERTING BATTERY INTO THE REMOTE CONTROL
With a CR2025 battery cell already installed, the
supplied remote control can be used to control the
system's operations once the system is connected.
Simply pullout and remove the plastic strip that is
wedged in the battery compartment and point the remote
control toward the main unit's infrared sensor to operate.
1
2
If battery power becomes depleted, install a new battery into the remote
control as follows:
1. Insert a blunt object such as a ballpoint pen into the small hole of
the battery compartment at the back of the remote control and
gently push out until the compartment can be removed from the
device with your hands.
2. Insert a new battery cell into the battery compartment's clip by
matching the "+" and "-" polarity. The "+" of the battery should be
facing upward.
3. Insert the battery compartment back into the remote control until it
is firmly positioned.
4. When using the remote control, point it at the sensor on the front
panel of the system.
WALL-MOUNTING THE SPEAKERS (OPTIONAL)
+06(QJ5B1RYB 11/10/2005, 08:13 PM9