Operation Manual

SETTING UP THE SYSTEM

CONNECTING SPEAKERS / SUBWOOFER

AM antenna

FM antenna

Speaker (Left)

Speaker (Right)

Your unit is supplied with light / dark grey speaker cable wires that are used to connect the speakers and subwoofer to the main

CD player unit's labelled "R" (right speaker), "L" (left speaker) and "SUB" (subwoofer).

1. Push up the corresponding speaker connectors' light / dark grey tabs on the main CD player unit.

2. Insert the light / dark grey speaker cable wires into the respective light / dark grey speaker connectors.

Ensure that the colours of the speaker cable wires match with the colours of the main unit's speaker connectors. That is,

the light-grey speaker cable wire should be connected only to the light-grey terminals and the dark-grey speaker cable wire

connected to the dark-grey terminals.

Never short-circuit light / dark grey speaker cable wires or reverse connections. Incorrect connection can damage the

speakers and subwoofer.

3. For the unit to be able to receive AM / FM radio reception, simply connect the AM loop antenna and FM pigtail antenna to

their respective AM / FM antenna jacks at the back of the player.

A blue translucent sheet protects the aluminium areas of the satellite speakers from scratching. Peel off the sheet to

operate.

Use only the speakers and subwoofer that is supplied with this unit. Using speakers or subwoofers of other types or

brands may short circuit or damage the unit.

NOTE

+06(QJ5B1RYB 11/10/2005, 08:13 PM8