Global 5-Day Weather Adviser I Model: I300 USER MANUAL
To Activate / Deactivate Alarm ................................... 8 To Silence Alarm ........................................................ 9 Backlight ...................................................................... 9 Reset ............................................................................. 9 Specifications .............................................................. 9 Precautions ................................................................ 10 About Oregon Scientific ................
EN NOTE Please keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know about. INTRODUCTION Thank you for selecting the Oregon Scientific™ Global 5-Day Weather Adviser I (I300). The weather station is capable of connecting to a PC computer using the USB connection. By installing the PC software, world cities can be user-selectable.
FRONT VIEW 1 10 11 2 3 4 5 6 7 8. Next 4 day regional weather forecast with HI / LO temperature (user selected city) 9. SNOOZE · MESSAGE: Activate snooze alarm; turn on backlight; toggle between weather warning / advisory / clock message 10. City name / Clock / Calendar / Scrolling warning message 12 13 14 11. : Indicate alarm time is displayed 12. : Indicate daily alarm is On 13. : Main unit batteries low 14. Today’s regional HI / LO temperature (user selected city) 8 9 BACK VIEW 1.
EN 1. ALARM: Change settings / display; activate / deactivate alarm; set alarm 2. MODE: Toggle between temperature and humidity display, set clock 3. Battery compartment Front View: 1. LED status indicator: Blink during registration with main unit or during sensor search; indicate a successful USB connection 4. ºC / ºF: Select temperature unit Back View: 5. Wall mount hole 1. 6.
EN Front View: 1. LED status indicator: Blink when transmitting a reading Back View: 1. RESET: Reset unit to default settings 2. Channel Switch 3. Battery compartment GETTING STARTED 6. SET UP REMOTE SENSOR 1. Slide open the battery door. 2. Select channel. 3. Insert the batteries, matching the polarities (+ / -) and press RESET. 4. Close the battery door. NOTE USB Communications Hub will search only for already registered sensor or new sensor reset within last 30 minutes.
EN • Position the sensor so that it faces the USB Communications Hub and main unit, minimizing obstructions such as doors, walls and furniture. • Place the sensor out of direct sunlight and moisture. • Place the sensor in a location with a clear view to the sky, away from metallic / electronic objects. • Position the sensor close to the USB Communications Hub and main unit during cold winter months as belowfreezing temperatures may affect battery performance and signal transmission.
3. Click on “Screen Saver” Tab in the Display Properties window. NOTE Batteries should not be exposed to excessive heat such as sunshine or fire. 4. Click on “Power” located at the bottom half of window. 5. A new window “Power Options Properties” will open. 6. Under “System standby” option, choose “Never” in drop down menu. DATA TRANSMISSION To upload / download weather data: • Install and start the PC software. • Select world cities in the software programme. • Set up the remote sensor.
EN 1. Press and hold MODE to enter settings. SCREEN DISPLAY 2. Press TO CHANGE DISPLAY MODES To toggle between 5 cities: Press / / to change settings. 3. Press MODE to confirm settings. . The settings order is: 12/24 hr format, hour, minute, year, month-day / day-month, month, day and language. To view alarm time and status: Press ALARM. NOTE The language options are English (ENG), German (GER), French (FRE), Italian (ITA), Spanish (SPA) and Russian (RUS).
Operating range -5°C to 50°C (23°F to 122°F) • Press SNOOZE · MESSAGE to silence it for 8 minutes Resolution 0.1°C (0.2°F) OR INDOOR RELATIVE HUMIDITY • Press any key to turn the alarm off and activate it again after 24 hours. Displayed range 2% to 98% Operating range 25% to 90% Resolution 1% BACKLIGHT USB COMMUNICATIONS HUB Press SNOOZE · MESSAGE to activate LED backlight for 8 seconds. RESET Press RESET to return to the default settings.
EN Temperature resolution 0.1°C (0.2°F) Signal frequency 433 MHz • Only use fresh batteries. Do not mix new and old batteries. Transmission range 100 m (300 ft) unobstructed • Approximately every 60 seconds Images shown in this manual may differ from the actual display. Transmission period • When disposing of this product, ensure it is collected separately for special treatment and not as normal household waste. Number of channels 3 Power 2 x UM-4 (AAA) 1.
FCC STATEMENT Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products. If you’re in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientific. com/service/support This device complies with Part 15 of the FCC Rules.
EN • Increase the separation between the equipment and receiver. is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help.
