Air Sanitizing System User Manual
FILTER REPLACEMENT
4
1.
2.
3.
1.
2.
3.
4.
1.
2.
lift it up gently.
position.
lift it up gently.
facing the unit.
Pull the air inlet cover out with your thumb and
household and in case of proper maintenance
or a brush.
vacuum cleaner.
Nano Filter
environment and in case of proper maintenance
Pre-Filter
1.
2.
3.
Pull the air inlet cover out with your thumb and
Press on the both sides of inlet cover lightly
inlet cover aligned as illustrated below.
NOTE
TROUBLESHOOTING
This chapter summarizes the most common
problems you could encounter when using the
unit. If you are unable to solve the problem with
Centre in your country.
Problem
come out smoothly
from the air outlet
The odors are not
removed properly.
The unit produces
an unusual noise
sizzling or
operation.
Solution
There may be a connection
properly.
yet or not inserted properly.
the inlet and outlet covers.
Perhaps you have not
removed the plastic wrapper
the plastic wrapper and
switch on the unit again.
Perhaps the ambient air
quality of the room is very
the windows to improve the
air circulation.
The nano filter may be too
dirty or may have reached
the end of its life. You
should clean the nano filter
Perhaps the room size
is bigger than the unit is
intended for. Use the unit
in a smaller room. The
recommended room size is
The air inlet or outlet may be
Remove the object that
SPECIFICATIONS
TYPE
MAIN UNIT
DESCRIPTION
Power
EN