Model: MP 130 User Manual Manuale d'uso Manuel d'utilisation MP130 EngManl R1 F(V1.
EN DIGITAL MP3 PLAYER (MP130) USER MANUAL CONTENTS Introduction ................................................................................. 1 Product Overview ....................................................................... 2 Getting Started ............................................................................ 3 Installing the Batteries ............................................................ 3 System Requirements ............................................................
EN Troubleshooting ........................................................................ 20 Hardware .............................................................................. 20 Software ............................................................................... 21 Caution ....................................................................................... 21 Technical Specifications .......................................................... 21 About Oregon Scientific .......................
EN INTRODUCTION Congratulations on your selection of the MP130. This full-featured MP3 Music Player offers a variety of features including multi-format support, FM radio and voice recorder capabilities. Your player combines various playback and audio enhancing features into a portable design that you can wear comfortably around your neck.
EN PRODUCT OVERVIEW FRONT 1. 2. 3. 4. 5. Neck strap loop. Earphone jack. LCD display. Microphone. +: Increase playback volume / toggle between different font displays in STOP status. 6. PREV : Review the current or previous song / back to the previous option. 7 7. NEXT : Skip to the next track or next 8 option. 9 8. –: Decrease playback volume / go back to 10 previous menu settings. 9. MENU: Enter menu settings / press to confirm selection. 10. USB port: For USB cable connection. 1 2 3 4 5 6 BACK 1.
1. Loop the strap around the MP3 player's loophole and secure tightly. 2. Plug the earphone connector into its corresponding jack. GETTING STARTED INSTALLING THE BATTERIES Before using your player for the first time, you should first install the battery. Be sure to check the polarity when inserting the battery into the battery compartment. The battery status indicators are as follows: Low Medium NOTE: When the battery icon shows as soon as possible.
EN • • • • • • Intel® Pentium® 133MHz or faster CD-ROM Drive USB 1.1 or USB 2.0 support 10MB free hard disk space Microsoft® Windows® 98SE, Me, XP or 2000 with Service Pack 3.0 or above installed Mac OS 10.2 or above DRIVER SOFTWARE INSTALLATION (FOR WIN98SE USERS ONLY) WINDOWS 98SE Installing the MP130 driver software will allow your computer to recognize your MP3 player each time it is connected to the computer. 1. Insert the MP130 CD-ROM into your computer.
NOTE: SD cards or MMC will not insert fully into the slot if it is facing the wrong way. Be careful not to apply undue force to the cards. To ensure the card is inserted securely, push the card gently into the slot until a click is heard. To remove the card press down on the card first to eject, then pull out. NOTE: Some brands of SD cards / MMC utilize a write-protect switch that protects against accidental erasure of data or prevents data stored on the card from being accessed.
EN To transfer files to and from your PC and player: 1. Double click the My Computer icon. 2. Double click the drive letter (i.e. Removable Disk (H:) or Removable Disk (I:)) of your player assigned by the computer. 3. Drag and drop the file(s) you wish to copy from your computer onto your player. NOTE: Your MP3 player is equipped for mass data storage support. This means that it can also be used as a portable hard drive to store and transport all forms of computer data files.
EN POWER ON / OFF POWER ON for To turn the power on, press and hold 2 seconds. A welcome screen will greet you. After a few seconds the unit will enter Music mode (STOP status with icon displayed). NOTE: In STOP status, a power saving feature will cause your MP3 player to automatically shut off if no audio is being played and no keys are pressed within 1 minute. The power will not automatically shut off when connected to the PC.
EN MUSIC PLAYBACK to turn the power on. 1. Press and hold 2. Press to start playback. TIP: See section "MENU NAVIGATION" for information about how to: • Display elapsed or remaining track time by changing the "TIME" setting. • Change the scrolling speed of a track name displayed under the "SCROLLING SPEED" section. STOP / PAUSE 1. During playback, press once to pause the track; the icon is displayed. 2. Or you can press and hold to stop the track and the icon is displayed.
EN VOLUME • Press + to increase volume • Press - to decrease volume TIP: Press and hold a volume button to rapidly change values. VOICE Recorded voice files are saved in .WAV format (i.e., VOICE001.WAV) and saved in a folder called "VOICE" in your MP3 player. After a recording has been made, you can retrieve and then playback the voice files in VOICE mode. TIP: You can change the default names after uploading the files to the VOICE folder of the Removable Disk icon shown on your computer and renaming them.
EN 1 1. Playback icon 2. File number 2 4 3. Voice file name 3 4. Playback elapsed time until the 3. Press again to pause playback. Press and hold icon is displayed to stop playback. PLAYBACK TRACK SECTIONS (A-B REPEAT) 1. While playing a track, press REC once to mark the start of the section you wish to repeat. The icon is displayed. 2. Press REC again to mark the end of the section. Your marked section is now ready to play repeatedly and the icon will appear on the display. 3.
4. Press or repeatedly to select a desired channel or press to exit current screen without saving. Up to 30 channels can be preset / saved. 5. Press MENU again to confirm preset. The channel number will be displayed. NOTE: FM scanning reception may vary in different areas. LISTENING TO PRESET CHANNELS 1. Enter "PRESET" status. 2. Press or to move to the next or previous preset channels (01 / 30~30 / 30).
EN NO.
RPT Pattern DESCRIPTION EN ICON All tracks are played once from the first track to the last track. Repeats the current track. You can press to skip to the next track. Normal One All Play all tracks once repeatedly. Ran All tracks are randomly selected and played back once. RPT Ran All tracks are randomly selected then played back once repeatedly. NOTE: RPT is not available as a menu option in RADIO mode.
EN DELETE ONE 1. Press or to choose a track for deletion. 2. Press MENU to delete the track. "File deleted" and the free memory will be displayed to confirm that the file has been erased. DELETE ALL 1. If you selected the delete "All" option from the menu and you pressed MENU to confirm, "Files deleted" will be displayed to confirm the deletion. NOTE: Please be careful when deleting files; once erased they cannot be retrieved.
MEMORY To check the status of your player's memory, external card memory or firmware version: 1. Press to scroll to MEMORY, then press MENU to select it. 2. Press or to scroll between "[I] T.", "[I] F.", "[C] T.", "[C] F.", "Ver". • Total amount of internal memory. • Amount of free internal memory . • Total amount of external card memory. • Amount of free external card memory. • The firmware version of your player.
EN SETTINGS While in the SETTINGS menu, you can choose to adjust the language, time display, tag information, and default setting options. LANGUAGE To set the display language in English, French, German, Italian, Spanish, or Portuguese: 1. Press to select the LANGUAGE setting, then press MENU to select it. 2. Press or to scroll through the different language options. 3. Press MENU to confirm selection. TIME DISPLAY To switch between "Elapse" or "Remain" time display information settings during playback: 1.
Factory default presets are: SETTINGS DEFAULT VALUE Volume Level RPT EQ BACKLIT CONTRAST SCROLL SP LANGUAGE TIME TAG 15 Normal Normal 3 seconds Level 3 Level 2 English Elapse On BUTTON HOLD You can activate an all button hold function, which locks all buttons to prevent the buttons from being accidentally pressed. The button hold indicator will show when buttons are locked. To lock all buttons, simply slide the HOLD switch to the on position. 17 MP130 EngManl R1(V1.
EN UPGRADING FIRMWARE (WINDOWS USERS ONLY) Upgrading your MP130 MP3 player with the latest firmware ensures the device provides optimal playback performance: 1. Go to the Oregon Scientific website (www.oregonscientific.com). 2. Click the country site that you purchased the player from and download the latest firmware updater (.zip file) and instruction guide. 3. Follow the instruction guide.
EN SAFETY AND CARE This product is designed to give you years of service if handled properly. Observe the following guidelines: • Clean the unit with a damp cloth and mild detergent. • Do not drop the unit or placing it in a high-traffic location. • Never immerse the unit in liquid. This can cause electrical shock and damage the unit. • Do not subject the main unit to extreme force, shock, or fluctuations in humidity. • Do not tamper with the internal components. • Do not scratch the LCD display.
EN TROUBLESHOOTING HARDWARE Music skips tracks. The music file may be corrupt or an unsupported format. First check to make sure it is a supported format. If the format is correct, delete the file and transfer the music from your PC to player again. The player will not start or shuts off soon after it starts. Check the battery polarity to make sure the battery is correctly inserted. If the battery level indicator shows low battery, replace with a new battery as soon possible. The buttons do not work.
SOFTWARE The MP130 software does not automatically begin when you insert the CD. You may need to start the installation process manually. 1. Double click the My Computer icon on the Windows desktop. 2. Double Click the drive that contains the CD-ROM. 3. Follow the on screen instructions to complete the installation process. CAUTION In case of electrostatic discharge, the product may not function properly and will require a manual reset.
EN FM radio frequency: Radio preset channels: Volume level: Language display: Earphone Out: Frequency Range: Signal to Noise Ratio: Battery: Battery Life*: MP3 to PC connection: Supported playback formats: Player firmware: 87.5~108MHz 30 0-30 8 language font display (English, French, German, Italian, Spanish, Portuguese, Traditional Chinese, Simplified Chinese) max. 20mW 20Hz~20000Hz 90dB 1 x AAA alkaline battery Approx. 15 hours continuous playback (at room temperature, default volume) USB 1.1 or USB 2.
EN ABOUT OREGON SCIENTIFIC Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products such as digital cameras; MP3 players; children's electronic learning products and games; projection clocks; health and fitness gear; weather stations; and digital and conference phones. The website also includes contact information for our customer care department in case you need to reach us, as well as frequently asked questions and customer downloads.
EN • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help. CAUTION: Modification-The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Oregon Scientific, Inc.
© 2004 Oregon Scientific. All rights reserved. 086-003399-106 MP130 EngManl R1 B(V1.