Operation Manual

EN
17
NOTE: The data rate may be adjusted by pressing the .
5. After the microphone source and data rate have been verified, press
and hold down the or MENU / ON button to return to the previous menu.
To get to the Record mode:
From the Main Menu, selecting the "Voice" option will take you to the FM folder.
To voice record:
1. Following the establishment of the settings for voice recording,
return to the Main Menu by pressing and holding the MENU /
ON button for 2 seconds or more.
2. Select "Record" with the button, then press the MENU / ON
button to enter the Record mode.
NOTE: Upon entering this function, recording starts automatically.
Recording may not be paused - it will continue until the / OFF key is
pressed. When the / OFF key is pressed, the recorded file is closed
and the user is returned to the Main Menu.
NOTE: The total amount of available time is determined by the space
available on the hard disk drive. As elapsed time increases, total
available recording time decreases by the same amount.
Recording of voice files is indicated as follows:
• The Voice folder (for storage) is indicated as part of the file name
• The file name displayed during recording has the format
of \ VOICE \ V001.WAV,
• The \ VOICE \ represents the Voice folder that the file will be
stored in, and also provides an indication of the type of file being
recorded.
• The file name assigned is an increment of one more than the
previous file name:
- Voice record files start out as V001.WAV
- The next file to be recorded would be incremented by a
value of 1.
- The second voice file would have a name of V002.WAV.
MP303 Eng r10 OP 9/16/04, 5:47 AM17