Operation Manual

NOTE: Remember to scroll past Auto Dimmer or Equalizer as the

Power savings cannot be seen on the first page of the screen.

4. Once "Power savings" has been highlighted, press the

MENU / ON button.

5. Move the

key up (or down) to select "Disable", "1 min",

"2 mins", "5 mins" or "10 mins."

6. When the desired setting has been reached, press the

MENU / ON button to return to the "Settings" Menu, or press

and hold the

or MENU / ON button to return to the Main Menu.

RECORD SETTINGS

The Record Settings sub-menu is used to:

• Determine the source of a recording (either the internal

microphone or the internal FM radio).

• The type of encoding (default encoding is ADPCM).

• The data rate for encoding.

To change the record settings:

1. On the Main Menu, use the

key to scroll down to select

"Settings," then press the

or MENU / ON button.

2. On the "Settings" Menu, use the

key to scroll down to select

"Record settings," then press the

or MENU / ON button.

3. To modify the source for recording, press the

key to toggle

between "Microphone" and "FM" (microphone is the default setting).

4. Scroll down until the "Encoder" value is highlighted, and press

the

or MENU / ON button to select the encoding method

desired (ADPCM is the default encoding method).

5. Scroll down until the "Channel" value is highlighted, and press

the

key to toggle between "Stereo" and "Mono."

6. Scroll down until the "Rate" is highlighted, and press the

key to scroll through the available data rate options.

7. When the desired setting has been reached, press the

MENU / ON button to return to the "Settings" Menu, or press

and hold the

or MENU / ON button to return to the Main Menu.

MP303 Eng r10 OP 9/16/04, 5:47 AM21