Operation Manual

To preset radio stations:

1. In the "Radio" mode, press the / OFF key once so "Auto Scan"

is displayed on the screen period.

2. Then press the

key. (The unit will then auto scan radio

stations and record them in chronological order).

NOTE: The unit will preset up to 15 preset stations.

To select a channel:

1. In the "Radio" mode, press the / OFF button to set the screen

in the "Preset" mode.

2. Then use the

button to move up or down. (The preset

channels will show on the screen - both the FM band number

and the preset channel number).

To tune a channel:

1. In the "Radio" mode, press the / OFF button to set the screen

in the "Tune" mode. (If the screen says "Preset" then you will

need to press the key twice).

2. Then use the button to move up or down. (The FM band number

will increase or decrease as you move the key. Simply tune until

you find a clear channel you want to listen to).

NOTE: FM scanning reception may vary in different areas.

To exit the Radio mode:

Simply press the

or MENU / ON button. (You will return to the Main

Menu).

The display in the Radio mode, you will see:

1. Button hold indicator

2. Battery status indicator

3. Frequency display (e.g. 102.35MHz)

4. Information display

MP306 Eng Manl (V1.0) 1/25/05, 5:54 PM16

¶´ƒ