Operation Manual

NOTE: If there is no recorded file, the

LCD shows a dotted line across the

screen.

1. Use - / or + / to navigate

through any previously stored radio

stations. Preset stations are

represented by alphanumerical

character such as "P19" shown on

the lower left corner of the LCD.

2. To adjust volume, press and

hold - / or + / .

3. If there are no previously stored

radio stations, press

to begin

searching for a station. The device

automatically switches to "Search"

as shown on the LCD.

NOTE: The backlight is turned off during recording to avoid any noise

that may result from having the backlight on.

FM TUNER (87.5MHZ - 108MHZ)

While in mode, press

to toggle between Preset, Search and

Store options. There are 30 preset channels in total.

NOTE: Press A-B / REC to switch to Mono or Stereo reception. This

may not be obvious in some areas due to differences in reception.

PRESET

1. Press and hold - / or + / until station auto-search

begins. Auto searching stops whenever a station is found or FM

signal is received. The player automatically begins audio

playback of the station.

2. During auto searching, press + / once to stop searching.

MP820 Eng r3 10/5/04, 11:20 AM10