Operation Manual

DISCONNECTING THE PLAYER FROM THE PC

WINDOWS 98 / 98SE

1. Double click the My Computer icon.

2. Right click the removable drive letter your player has been

assigned.

3. Click "Eject" from list before disconnecting.

WINDOWS ME, 2000, XP

1. Click the "Stop USB Mass Storage Device" icon on the

Windows taskbar at the bottom right of the monitor.

2. Click your player drive letter to stop the device before

disconnecting.

NOTE: Before unplugging your player from your computer, wait at

least 15 seconds after the audio or data file transfer is completed to

prevent any data loss.

USING THE AUDIO PLAYER

POWER ON / OFF

The POWER switch controls when the device is on or off. The switch

is used to reset the device if it is not operating properly or if it has

timed out.

1. During normal operation, slide the switch to "ON". If the device

needs to be reset, slide the switch to the "OFF" position, and

switch it back to the "ON" position after 2 minutes.

2. Then press the MENU / ON / OFF button to turn the player on.

The blue backlight LCD display appears. Every time a button is

pressed, the backlight turns on for about 5 seconds. If no other

keys are pressed within 5 seconds, the backlight turns off

automatically.

NOTE: The POWER switch must be activated before pressing

MENU / ON / OFF, otherwise the device cannot be turned on.

MP820 Eng r3 10/5/04, 11:20 AM6