Operation Manual

ManualsBrandsOregon Scientific ManualsMiscellaneousNTS912

ELECTRONIC THERMOMETER

Model NTS-912

User Manual

CONTENTS

Introduction...................................................................

Features.........................................................................

Description Of Parts.....................................................

Installing And Replacing The Battery.........................

Display And Functions.................................................

General Operation........................................................

How To Select The Indoor Or Outdoor Temperature

Reading..........................................................................

How To Reset The Maximum Or Minimum

Memories.......................................................................

About The Temperature Alarm....................................

How To Select The ON / OFF Of The Temperature

Alarm..............................................................................

How To Set The HIGH / LOW Temperature Alarm

Limits.............................................................................

How To Select The Temperature Units Of

Measure.........................................................................

How To Select The Rate Of Sampling

Cycle..............................................................................

The Reset Button..........................................................

Low Battery Signal Indication......................................

Securing The Outdoor Sensor Probe..........................

Free Standing Or Wall Mounting..................................

Maintenance..................................................................

Specifications................................................................

About Oregon Scientific...............................................

EC-Declaration Of Conformity.....................................

NTS912manual-E 04/12/15, 5:39 PM1

Summary of content (9 pages)

PAGE 1
EN ELECTRONIC THERMOMETER The Reset Button.......................................................... 6 Low Battery Signal Indication...................................... 6 Model NTS-912 Securing The Outdoor Sensor Probe.......................... 6 User Manual Free Standing Or Wall Mounting.................................. 7 Maintenance.................................................................. 7 CONTENTS Specifications................................................................
PAGE 2
EN DESCRIPTION OF PARTS INTRODUCTION Thank you for purchasing the Oregon Scientific thermometer. This thermometer has been designed specifically with performance and ease of use in mind. As with all Oregon Scientific products, this thermometer is made to the highest quality standards using precision electronic components and should give you many years of trouble free use. Please read the user manual carefully before use to ensure you get the best out of your new thermometer.
PAGE 3
EN NOTE After replacing the battery, the display will turn on for about 3 seconds and then show the MAX/MIN DISPLAY MODE. DISPLAY AND FUNCTIONS INSTALLING AND REPLACING THE BATTERY The thermometer uses one piece UM-4 or ‘AAA’ size battery. If the °C or °F digit flashes, remove the exhausted battery and follow these steps to install or replace the battery: 1. Slide the battery cover in the direction of the arrow. 2.
PAGE 4
EN GENERAL OPERATION The unit has two operating modes: MAX/MIN DISPLAY MODE and HI/LO DISPLAY MODE. To change from one mode to another, press [MODE] button once. MAX/MIN DISPLAY MODE: Shows the current temperature and the maximum and minimum temperature at the same time. NOTE Initially the ‘Max’ and ‘Min’ values will display the same temperature values as the current temperature display until changes in temperature are recorded.
PAGE 5
EN and the temperature has already risen / dropped and passed the high or low limit, at that instant, no alarm will sound if the [ALARM ON/OFF] is switched to the ON position so that no alarm will sound. ABOUT THE TEMPERATURE ALARM Whenever the alarm is activated, the alarm will sound for 1 minute when the current temperature rises and crosses the high or low temperature alarm limit.
PAGE 6
EN The selecting range is from -50°C to +70°C (-58°F to +158°F). Press and hold the [HI] button to select the high temperature alarm limit more quickly. THE RESET BUTTON Uses a pointed object to push the reset button once, which is located on the back of the unit, to update the display whenever a change is made to either of the following: To set the low temperature alarm limit, press the [LO] button to increase by 1° increments until the desired low temperature alarm limit is displayed. 1.
PAGE 7
EN MAINTENANCE The following suggestions will help you care for the Thermometer so you can enjoy it for years. 1. Keep the Thermometer dry. If it gets wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electric circuits. 2. Use and store the Thermometer only in normal temperature environments. Temperature extremes can shorten the life of electronic devices, damage the battery, and distort or melt plastic parts. 3. Handle the Thermometer gently and carefully.
PAGE 8
EN - The contents of this manual is subject to change without further notice. SPECIFICATIONS Operating temperature : 0°C to 50°C (32°F to 122°F) - Due to printing limitations, the displays shown in this manual may differ from the actual displays.
PAGE 9
EN ABOUT OREGON SCIENTIFIC EC-DECLARATION OF CONFORMITY Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products such as digital cameras; MP3 players; children's electronic learning products and games; projection clocks; health and fitness gear; weather stations; and digital and conference phones. The website also includes contact information for our customer care department in case you need to reach us, as well as frequently asked questions and customer downloads.