Two-Way Radio User Manual

VOLUME

To change the volume level:

Use

or to increase or decrease volume.

RESET

To reset the unit:

Remove the batteries for two minutes and insert them again.

TALK TO ANOTHER TRANSCEIVER

For best transmission speak about 5 cm away from the radio and leave a

short pause before speaking once you have pressed .

To talk to another transceiver:

1. Pres

s and hold to check if the channel is free.

2. Press and h

old and speak into the microphone to transmit.

When nis

hed, release the button. The transceiver will automatically

play received transmissions.

3. Release

once you have nished speaking to allow other

radios

to respond.

NOTE: You can only communicate with another transceiver that is on the

same channel and using the same CTCSS code as your transceiver.

PAGE ANOTHER TRANSCEIVER

To page all transceivers tuned to the same channel:

Press .

NOTE: The call tone will be heard from your device and from the receiving

party’s unit at the same time.

P/N:086L004722-016 REV.1 PAGE: 10/152