Easy Multi Channel Thermometer Model: RAR621 User Manual RAR621 English Cover R4 OP 1 Black 8/18/04, 5:29 PM
Select Channel Number ....................................... 11 Contents ................................................................... 1 Select Minimum / Maximum Records .................. 12 Introduction .............................................................. 2 Reset System ......................................................... 12 Product Overview .................................................... 3 Safety & Care ..........................................................
EN INTRODUCTION Thank you for selecting the Oregon Scientific TM Multi Channel Thermometer (RAR621). This device bundles precise time keeping, alarm, and temperature monitoring features into a single tool you can use from the convenience of your home. In this box, you will find: • Main unit • Remote sensor • Main unit batteries • Remote sensor batteries Keep this manual handy as you use your new product.
EN PRODUCT OVERVIEW FRONT VIEW The Multi Channel Thermometer features: 1. Outdoor Temperature: Three-channel temperature readings, (this feature is sold separately). To the right of it is the indoor temperature. 2 1 2. 3 and button: Press to increase settings. 3. MODE button: Press to change display / settings. 4. CHANNEL button: Selects one of the 3 weather channels. 4 5 5. button: Press to view and set times for "single" and "weekday" alarms.
EN BACK VIEW 1. Wall mount hole 2. Battery compartment: Contains 2 x "AAA"UM4 1.5V batteries. 1 3. Table stand 4. Batteries 2 5. RESET hole: Changes all settings back to the default settings. 6. MEM button: Displays the maximum and minimum temperatures recently recorded.
EN LCD DISPLAY 1 6 2 7 1. Outdoor temperature reading 2. 3 Channels: Shows 1, 2 or 3 3. Battery indicator for remote sensor 3 4. Alarm display indicator 8 5. Time or calendar 9 6. Indoor temperature indicator 7. Battery indicator for main unit 10 4 8. Indoor temperature reading 5 9. Indicates "single" or "weekday" alarm 10.
EN REMOTE SENSOR (THN122N) 1 1 2 3 4 1. LED status indicator 1. Wall mount hole 2. RESET hole 3. Channel number (1-3) 4.
EN GETTING STARTED UNIT BATTERIES Main Batteries are supplied with this product: Main unit 2 x UM-4 (AAA) 1.5V batteries Remote unit 2 x UM-4 (AAA) 1.5V batteries LOCATION Indoor Temperature Area Remote Outdoor Temperature Area CHANGE SETTINGS To change, time, calendar and language settings: NOTE It is recommended that you use alkaline batteries with this product for longer performance. 1. Press and hold MODE for 2 seconds to enter setting mode.
EN 3. Set the channel. The switch is located in the battery compartment. Installing the Wall Mount 4. Place the sensor near the main unit. Press RESET on the sensor. Then, press and hold MEM and CHANNEL on the main unit to initiate signal sending between the sensor and the main unit. The reception icon on the main unit will blink for approximately 3 minutes while it is searching for the sensor. (Refer to the Sensor Data Transmission section for more information.) 5.
ICON DESCRIPTION Main unit is searching for sensors. • Insert the batteries and select the channel before you mount the sensor. • Place the sensor out of direct sunlight and moisture. At least 1 channel has been found. • Do not place the sensor more than 30 meters (98 feet) from the main (indoor) unit. Channel 1 is selected. (number will change depending on the sensor you select.
EN CLOCK This product has two displays: Clock with day of week in German, English, French, Italian, or Spanish, and Calendar display with month and date. SET CLOCK 1. Press and hold MODE for 2 seconds. The Clock Area will blink. ALARM 2. Select the hour offset (-9 to +9), hour display format (12 or 24 hour), hour, minute, year, month, day, and language. Press or to change the setting. Press MODE to confirm. This product has 2 alarms: a Single Alarm and a Weekday Alarm.
EN SET ALARM STOP ALARM to display the type of Alarm you wish to 1. Press set: Weekday or Single. To stop the alarm from ringing, Press . TEMPERATURE This product can display current, minimum, and maximum temperature information collected by the remote sensors and main (indoor) unit. Outdoor data is collected and displayed every 78 seconds. Indoor data is collected and displayed every 10 seconds. again for 2 seconds. The Alarm 2. Press and hold settings will blink.
EN NOTE For more information on the sensor see "Remote Sensor THN122N" Section. WARNINGS This product is designed to give you years of service if handled properly. Oregon Scientific will not be responsible for any deviations in the usage of the device from those specified in the user instructions or any unapproved alterations or repairs of the product. Observe the following guidelines: MINIMUM / MAXIMUM RECORDS The MEM button is located in the main unit battery compartment.
SPECIFICATIONS PROBLEM SYMPTOM REMEDY Calendar Strange date / month Change language Temp Remote sensor Shows "LLL" or "HHH" Temperature is out-of-range Cannot locate remote sensor Check batteries MAIN UNIT DIMENSIONS LxWxH 103 x 48 x 75 mm (4.06 x 1.89 x 2.96 inches) Weight 82 g (2.9 ounces) without batteries REMOTE SENSOR DIMENSIONS LxWxH 92 x 60 x 20 mm (3.6 x 2.4 x .79 inches) Weight 63 grams (2.
EN CLOCK ABOUT OREGON SCIENTIFIC Clock display HH:MM:SS Hour format 12hr AM / PM or 24hr Hour offset + / - 9 hours Calendar DD / MM; weekday in 5 languages (E, D, F, I, S) Alarm weekday and single; 2-minute crescendo Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products such as digital cameras, MP3 players, projection clocks, health and fitness gear, weather stations, and digital and conference phones.
EN Additional information: EC-DECLARATION OF CONFORMITY The product herewith complies with the requirements of the Low Voltage Directive 73 / 23 / EC, the EMC Directive 89 / 336 / EC and carries the CE marking accordingly. This product contains the approved transmitter module that complies with the essential requirements of Article 3 of the R&TTE 1999 / 5 / EC Directive, if used as intended and the following standards have been applied: Safety of information technology equipment (Article 3.1.
© 2004 Oregon Scientific. All Rights Reserved. P/N.
