Operation Manual

ManualsBrandsOregon Scientific ManualsAMRM868P

RADIO-CONTROLLED

PROJECTION CLOCK

MODEL NO.: RM868P/RM868PU

USER’S MANUAL

SECTION 1 INTRODUCTION

Congratulations on your purchasing the RM868P Radio-controlled

projection Clock.

The Projection Clock is a compact, easy-to-handle device. The

RM868P — the Central Europe model — is designed to

automatically synchronize its current time and date when brought

within an approximate 1500km radius of the radio signal generated

from Frankfurt, Germany (DCF77). The RM868PU — the UK model

— will do the same when brought within range with MSF in the

United Kingdom.

The Projection Clock also comes with favorable features such as

clock projection, multilingual day-of-the-week display, back-light,

dual analog and digital displays of time and daily alarm with 8-

minute snooze function.

Summary of content (9 pages)

PAGE 1
GB RADIO-CONTROLLED PROJECTION CLOCK MODEL NO.: RM868P/RM868PU USER’S MANUAL SECTION 1 INTRODUCTION Congratulations on your purchasing the RM868P Radio-controlled projection Clock. The Projection Clock is a compact, easy-to-handle device. The RM868P — the Central Europe model — is designed to automatically synchronize its current time and date when brought within an approximate 1500km radius of the radio signal generated from Frankfurt, Germany (DCF77).
PAGE 2
GB DISPLAY BUTTONS A DIGITAL CLOCK DISPLAY B ANALOG CLOCK DISPLAY CONTROL BUTTONS C [MODE/SET] BUTTON Changes the display mode or holds to enter the setting routine D [ALARM] BUTTON Manipulates the daily alarm function E [ ] AND [ ] BUTTONS L 3 V DC JACK Change the value of a setting For AC power adapter installation F [ SNOOZE ] BUTTON M WALL - MOUNT HOLE Activates the snooze function or turns on the back-light and clock projection N PROJECTOR G [RESET] BUTTON POWER Returns all settings to de
PAGE 3
GB HOW TO ACTIVATE THE BACK-LIGHT Press [ SNOOZE ] to turn on the back-light for 5 seconds. HOW TO USE THE CLOCK PROJECTION The clock projection makes it easier for you to read the Current time or Alarm time with alarm-on/off status at night. To use the feature, 1. Press [ SNOOZE ] to turn on the projection for 5 seconds. The ] on or off) will be current time with alarm-on/off status ( [ projected onto the surface the lens is facing. To install the adapter: 1.
PAGE 4
GB Once the power adapter is in place, you can select to turn on the projector for longer time (such as throughout the night) by sliding the [ PROJECTION ON ] switch on. To turn off the projector, slide the switch back.
PAGE 5
GB signal. After that, the periodical scanning will only take a few seconds. 2) Current Time with Weekday ------------------------------------ The antenna icon indicates the quality of reception. Calendar 3) Current Time with Weekday STRONG -----------------------------------2nd zone-time WEAK 4) 2nd zone-time with Weekday NO RECEPTION -----------------------------------2nd zone-time Calendar RECEIVING To display the alarm clock and details, press [ALARM].
PAGE 6
GB HOW TO ENABLE OR DISABLE AUTO-RECEPTION If you wish to disable the auto-reception of radio signal feature ] button for 2 while the unit is within range, press and hold [ seconds. The radio-reception icon on the will disappear and the unit will NOT respond to radio signals. To enable the feature again, press and hold [ ] for 2 seconds. The radio-reception icon will be shown again and it will start blinking to initiate reception automatically. HOW TO SET THE CLOCK & CALENDAR MANUALLY 1.
PAGE 7
Monday Tuesday Wed. Thursday Friday Saturday Sunday 6. Press [ALARM] . English The alarm will be automatically activated. The [ ] icon will appear. To deactivate the alarm, press [ ] / [ ] when the alarm time is displayed. German French HOW TO USE THE DAILY ALARM Italian Spanish An alarm will go off for 2 minutes in two-step crescendo patterns if undisturbed. The [ ] icon will flash, the back-light and the clock projection will be activated for 5 seconds. To mute the alarm, press any key.
PAGE 8
GB SECTION 3 ADDITIONAL INFORMATION NOTES ON BACKLIGHT - The EL panel that provides illumination will lose power after extensive usage. - The unit may emit an audible sound whenever the display is illuminated by the EL backlight. This is due to vibration of the EL panel used for illumination and does not indicate malfunction of the unit.
PAGE 9
Radio Control : Auto Synchronization of current time and date This device complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directive, if used for its intended use and that the following standard(s) has been applied: Calendar : Day-of-Week in English / German / Franch / Italian / Spanish Electromagnetic compatibility (Article 3.1.b of the R&TTE Directive) Clock Time : 12 / 24-hour format Accuracy : +/- 0.