Operation Manual

HOW TO ENABLE OR DISABLE

AUTO-RECEPTION

If you wish to disable the auto-reception of radio signal feature

while the unit is within range, press and hold [ ] button for 2

seconds. The radio-reception icon on the will disappear and the

unit will NOT respond to radio signals.

To enable the feature again, press and hold [

] for 2 seconds. The

radio-reception icon will be shown again and it will start blinking

to initiate reception automatically.

HOW TO SET THE CLOCK &

CALENDAR MANUALLY

1. Press and hold [MODE/SET] for 2 seconds.

2. Enter the 2

time-zone offset hour using [ ] / [ ] . You can

select between + 23 and - 23 hours. Hold down either button to

rapidly increase or decrease the value. Press [MODE/SET] .

3. Enter the clock format using [

] / [ ] . You can select 12-hour

or 24-hour display.

4. Press [MODE/SET] .

5. Enter the hours using [

] / [ ] . The hand of hour on the

analog display will be adjusted simultaneously.

6. Press [MODE/SET] .

7. Enter the minutes using [

] / [ ] . The hand of minutes on

the analog display will be adjusted simultaneously.

8. Press [MODE/SET] .

9. Follow the same pattern to set the year, date format (month-day

or day-month), month, day, and display language (English [E],

German [D], French [F], Italian [I] or Spanish [S]) for day-of-the-

week.