Operation Manual

4
GB
HOW TO USE THE PROJECTION
The projection makes it easier for you to read the time and the
alarm on/off status at night. To use the feature,
1. Slide the [LOCK] slide switch to expose the projection lens.
2. Press [SNOOZE/
] to turn on the projection for 5 seconds.
The current time in digital format (as shown in the analog clock
display) will be projected onto the surface which the lens is
facing. The alarm-on Indicator [
] will also be projected if
the Alarm is being activated.
3. Adjust the projected image using the [FOCUS] knob.
For continuous projection, you can also acquire an optional
universal power adapter (model no.: AD888P/ AD888PU) from an
authorized dealer. When the power adapter is connected to the unit,
the clock projection will be activated and remain so by pressing
and holding [SNOOZE/
] for 2 seconds. To deactivate the
feature, press and hold the button for 2 seconds again or simply
remove the power adapter.
Note: Remember to leave the projection lens uncovered when the
continuous projection function is being activated.
When you are not using the clock projection feature, slide the
[LOCK] switch close to protect the lens and lock the keys.
SECTION 2
THE CALENDAR CLOCK
DEFAULT ANALOG CLOCK DISPLAY
You can select the local time or home time (the radio-controlled
time) as the default analog clock display by using [SWAP] hidden
inside the battery compartment. When the local time is selected or
shown, the
icon will be displayed.
DIGITAL DISPLAY MODES
Press [MODE] to display the following in sequence:
• Radio-Controlled Clock Time (same as the default analog clock
display)
• Day of the week
• Calendar (Month: Day or Day: Month format)
• 2nd time-zone (Local or home time)