Operation Manual

ManualsBrandsOregon Scientific ManualsAMRMR391P

Slim Projection Clock with Indoor/

Outdoor Temperature

Model: RMR391P / RMR391PA / RMR391PU

USER MANUAL

Summary of content (11 pages)

PAGE 1
EN Slim Projection Clock with Indoor/ Outdoor Temperature Model: RMR391P / RMR391PA / RMR391PU USER MANUAL 1
PAGE 3
Speciﬁcations ........................................................ 8 About Oregon Scientiﬁc ......................................... 8 EU-Declaration of conformity ................................ 8 FCC Statement ......................................................... 9 USER MANUAL CONTENTS Overview .................................................................. 2 Front view ............................................................. 2 Back view .................................................
PAGE 4
EN BACK VIEW OVERVIEW 1 FRONT VIEW 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 1. ºC / ºF: select temperature unit 2. / : increase / decrease value of the setting; activate / deactivate clock reception signal 3. ON·PROJECTION·OFF: enable / disable continuous projection 4. : view alarm status; set alarm; activate / deactivate alarm function 5. BACKLIGHT·HI·OFF·LO: enable / disable continuous backlight; select brightness 6. MODE: set clock 7.
PAGE 5
EN BOTTOM VIEW GETTING STARTED POWER SUPPLY 2 x CR2032 batteries 2 To insert batteries: 1. Remove the battery compartment cover. 2. Insert the batteries, matching the polarities. 3. Press RESET after each battery change. 1 1. Adapter socket 2. Battery compartment LOCATION REMOTE SENSOR 2 4 1. 2. 3. 4. 5. Main unit batteries low Outdoor / indoor temperature area Sensor batteries low 1 x adapter: Alternatively, use the adapter supplied to power the unit.
PAGE 6
EN sensor. The sensor reception icon in the remote sensor area shows the status: REMOTE SENSOR To set up the remote sensor: 1. Slide open the battery compartment. 2. Slide channel switch to select channel 1. 3. Insert the battery, matching the polarities. 4. Press RESET after each battery change. 5. Close the battery compartment. 6. Place the sensor within 30 m (98 ft) of the main unit using the table stand or wall mount.
PAGE 7
MANUALLY SET CLOCK To set the clock manually, disable the clock signal reception ﬁrst. 1. Press and hold MODE. 2. Press or to change the settings. 3. Press MODE to conﬁrm. 4. The setting order is: time zone offset, 12/24-hr format, hour, minute, year, day / month format, month, day and language. RMR391P / RMR391PU: Time zone offset sets the clock +/- 23 hours from the received clock signal time. If you have deactivated the clock signal reception, do not set a value for time zone.
PAGE 8
EN exhausted, the projection feature will be disabled. To toggle alarms ON / OFF: 1. Press to display alarm time. again to turn alarm ON / OFF. 2. Press To project image brieﬂy: • Touch SNOOZE / LIGHT. To silence the alarm: • Touch SNOOZE / LIGHT to silence it for 8 minutes OR • Press any other key to turn the alarm off and activate it again after 24 hours. To ﬂip projected image by 180º: • Touch SNOOZE / LIGHT. To adjust location of projected image: • Swivel the projection arm as required.
PAGE 9
• To deactivate continuous backlight: • Slide BACKLIGHT switch to OFF. (Touch SNOOZE/ LIGHT to turn backlight on for 5 seconds). • • RESET Press RESET to return to the default settings. • PRECAUTIONS • • • • • • • • Do not subject the unit to excessive force, shock, dust, temperature or humidity. Do not cover the ventilation holes with any items such as newspapers, curtains etc. Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.
PAGE 10
EN SPECIFICATIONS TYPE ABOUT OREGON SCIENTIFIC Visit our website (www.oregonscientiﬁc.com) to learn more about Oregon Scientiﬁc products. If you’re in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientiﬁc.com/service/support.asp For international inquiries, please visit: www2.oregonscientiﬁc.com/about/international.asp DESCRIPTION MAIN UNIT LxWxH 175 x 80 x 18 mm (6.9 x 3.2 x 0.7 in) Weight 240 g (8.
PAGE 11
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. DECLARATION OF CONFORMITY The following information is not to be used as contact for support or sales. Please visit our website at www2. oregonscientiﬁc.com/service for all enquiries. We Name: Oregon Scientiﬁc, Inc.