Operation Manual

12
ENG
Returning missed calls
If you subscribe for caller ID sevice through your telephone carrier your
ThermoDect telephone can keep track of missed calls information for you. When
you miss a call, the handset will display “New Calls” and the number of calls you
missed. To review the call history (including caller ID), press the
button. To
dial the number, press the button.
Ending a telephone call
To end a telephone call, press .
Using the handset speakerphone
To use the handset speakerphone during a conversation, press the button.
The battery life for speakerphone mode is ~ 1 hour.
To turn off the speakerphone, press the button again.
Note: To adjust the speaker volume, press
first and then or .
Muting the microphone
You can temporarily mute the microphone on your handset to prevent a caller
from hearing a side conversation. To activate or deactivate the mute feature:
1. Press
to mute the microphone.
Note: The handset display shows the words Secrecy on while the
microphone is muted. You cannot press any digits on the keypad until you
return to normal listening mode.
2. To return the handset to normal listening mode, press
again.
Paging the handset from the base unit
To locate a lost or misplaced handset, press the PAGE button on the base unit.
This forces the handset to ring for 30 seconds. Once you locate the handset,
press any key to end the page.
Displaying caller ID information
If you have subscribed to caller ID service through your local carrier,the handset
can display the name and number of a caller. To be displayed, the name must
either be supplied by your network provider or entered in your phonebook. Your
phone can track the caller IDs for up to 10 callers, along with the following
information:
• Caller number (up to 20 digits).
• Caller name (up to 8 characters) if this is stored in the phonebook or supplied
by your telephone network provider.
• The date and time of the last call made from the number.
• The number of calls made to the number.