Operation Manual

19
ENG
4. Press to select PABX setup from the options.
5. Press
.
6. Press
again to select Code 1 from the options.
7. Enter the security PIN for the base, followed by the prefix. For more
information about the security PIN, refer to the next section.
Example: The security PIN for John’s ThermoDECT telephone is “0000”.
To dial an external number in his PABX, he must dial “9”, and then the
number. John would enter “0000” and “9” for this step.
8. Press
to confirm your entry.
9. (Optional) Repeat Steps 6 - 8 to set up a second prefix.
Tip: To return to standby mode, press and hold the
button.
To select a pause duration:
1. Follow Steps 1 – 5 above to enter the PABX setup menu.
2. Press the
button to select Pause setup from the options.
3. Press
to confirm your entry.
Tip: To return to standby mode, press and hold the
button.
Changing the security PIN
The handset is shipped with the security PIN (Personal Identification Number) set to
“0000”. You can change this to any 1-8 digit PIN you choose.The security PIN is
used for resetting the system and identifying the telephone in a PABX (Private
Automatic Branch Exchange) or local telephone network.
To change the security PIN:
1. Press the button.
2. Press to select Setup from the options.
3. Press
.
4. Press to select PIN code from the options.
5. Press
.
6. Enter the new PIN number. The PIN number will not show on the display for
security reasons.
7. Press
to confirm the change.
Tip: To return to standby mode, press and hold the
button.