Operation Manual

20
ENG
Resetting your telephone system
Resetting the system clears all information that you have stored on the handset
– such as telephone book entries, caller ID history, and the baby call
(emergency call) number – and returns your ThermoDECT telephone to its default
settings (shown on page 32). There are two ways to reset the system – with a
security PIN, and without a security PIN.
To reset the system with a security PIN:
1. Press the
button.
2. Press to select Setup from the options.
3. Press
.
4. Press to select Default from the options.
5. Press
.
6. Enter your security PIN number. If you enter the wrong PIN number, an Error
message displays.
7. Press
. A confirmation melody sounds from the handset, and the system
resets and flashes the word “Base” on the handset. Hold the handset near the
base unit for a few seconds until it finds the base.
To reset the system without a security PIN:
1. Slide the battery lid off the back of the unit.
2. Remove the handset batteries.
3. Press and hold the
button.
4. Insert the batteries into the handset, then release the button. The word Default
displays on the handset to confirm the system has been reset.
5. Slide the battery lid back onto the unit until it clicks into place.
6. Press
to reset the system or to cancel .
Setting handset ring priority
Ring priority allows you to set one handset to ring before others start. To turn the
handset ring priority off or on:
1. Press the
button.
2. Press
to select Setup from the options.
3. Press
.
4. Press
to select Ring Priority from the options.
5. Press
.
6. Press
to set the ring priority to off, on, or Def. Priority.